Electronics Forum | Mon Aug 05 09:16:39 EDT 2013 | valeriusx
Greetings. I'm having some difficulties in configuring 2 old SIPLACE Placement Machines - 80S-15 and 80F-3. They are already installed, there are no errors on machines computers, but I can't configure connection between these machines and the line c
Electronics Forum | Fri Sep 01 05:29:01 EDT 2017 | mona0312
Hi, Recently, i found a company called "jlcpcb". It’s very cheap 10pcs boards. 1.2mm thick, 1-OZ copper, 6/6-mil outer (0.1525mm) just cost $2 Cheap price and lots of options regarding board thickness, colour, etc. None of my boards have ever had a
Electronics Forum | Wed Oct 02 13:54:39 EDT 2019 | fundomikey
Hello, I have a problem with settings vision for LED (similar to this one: https://www.lumex.com/news/SML-LXIL0603-narrow-beam.html) on JUKI KE3020. The LED is mounted on the side. At the beginning I would like to say that laser recognition is impos
Electronics Forum | Thu Nov 26 03:59:59 EST 2020 | ravikumargv
Dear All... Greetings.... Recently My S27HM machine MC had problem and i replaced another same S27HM machine MC and updated BIOS and installed RMOS1&2 after Distribution successfully completed power off the machine and power On the machine, afte
Electronics Forum | Thu Jul 01 16:02:45 EDT 2021 | willkillum
Greetings. Make sure the calibration/homing chip is still with the machine and not lost, although you can buy a replacement from Juki for a not-so-nominal fee. Also, have the seller power it up and bring up the Laser image display/edge check. If ther
Electronics Forum | Mon Nov 08 14:45:19 EST 2021 | nparo
Greetings, I have an AOI machine that I am programming however I have ran into an issue with the board grab function. I an creating a new program and the screen should show the camera image and allow me to grab the board corners and create the image
Electronics Forum | Sun Nov 28 02:23:38 EST 2021 | tueftler
Hi there. I have an Ipulse M1 mounting mashine. For that i have PS84 and F1 Feeders. Now i have a strange behavior with my new F1-16 feeder. The machine dont had the F1-16 feeder type on its library. So i have insert it by myself. The problem is, th
Electronics Forum | Wed Feb 23 13:22:31 EST 2022 | micropak
Congratulations on being operational again... Few years ago, I acquired a Siplace line (S20 + F3 + S15 + G2) and I rebuild it completely because the line was lying idle for more than 10 years. All belts, pneumatic cylinders, pneumatic pipes were cha
Electronics Forum | Sat Sep 10 17:12:18 EDT 2022 | yannick_herzog
Hello, we use an oven to dry our MSL components after the floor lifes expires. The oven works at 40°C / 0.1% RH. The plan is to upgrade the oven from 40°C to 60°C to shorten the duration of the process. I have found a number of articles mentioning
Electronics Forum | Sun Nov 06 17:52:16 EST 2022 | yannick_herzog
Hello, we mark our PCBs with a data matrix code using an INSIGNUM Laser 4000 from ASYS. This DMC is read at each machine for traceability. Also on our Fuji AIMEX IIIc pick-and-place machines. Unfortunately, we always have problems with the recognit
