Electronics Forum | Tue May 21 08:26:14 EDT 2002 | stefwitt
without knowing your machine, I guess the axis does not find the zero pulse. You may have to re-place the incremental or linear encoder for the X-axis. Some vendors use proximity switches for a zero pulse which could be defective. If the axis stops i
Electronics Forum | Tue Jan 24 12:16:51 EST 2006 | PWH
Although I can't say I've had much trouble at all with MpM's reading fids, I will say that most of the P&P equipment I have run can be picky on fids. The fid surface needs to be pretty flat in order to be trouble free on some P&P equipment. I don't
Electronics Forum | Mon Aug 14 11:30:25 EDT 2006 | SWAG
We had centernest to I/O track alignment problems that were not predictable on 3000. Z-axis height seemed good with relation to I/O tracks but y was misaligned. Ended up replacing y-axis stepper and trouble went away. Also have had trouble with z-
Electronics Forum | Thu Mar 20 16:38:49 EDT 2008 | slthomas
I did similar investigation a while back and what I concluded is that the GSMs would be more trouble to set up than the Philips Topaz we were also looking at. It is trouble enough, but we only use it for our longer running jobs and we use FES carts t
Electronics Forum | Thu Jun 25 21:06:38 EDT 2020 | jshepard77
I have an old Quad 100 pick and place from the 90's that currently is not working. We bought the machine for basically nothing. The reason we bought it was that it had a ton of feeders that work with a 4000C machine that we have. Before I take thi
Electronics Forum | Sat Apr 04 09:47:48 EST 1998 | John A. Ross
For nearly 30 months I have waited on Contact Systems resolving indexing and clearanceproblems with their 32mm and 44mm tape feeders. I think that the service that they offer is pretty poor. Am I alone? Does anyone else use their larger feeders a
Electronics Forum | Tue Feb 22 06:47:43 EST 2005 | bobpan
Is anyone out there using V 6.6 OLP to balance the line for a couple of QSA-30 machines. I am thinking of doing it but need to dig up an old computer with windows 95 and just wondered if anyone was doing it or if it was worth the trouble. Thanks
Electronics Forum | Thu May 18 10:46:42 EDT 2006 | teilo
Why you have trouble just visit http://www.teiloengineering.com for stress free , lead free wave soldering production. We have already converted over 20 machines with no corrosion or contamination problems. All parts manufactured from titanium.
Electronics Forum | Tue Feb 26 14:39:19 EST 2013 | eniac
Hi, guys. Does anyone use a EBSO selective soldering machines? Can you write your parameters for two rows connector? Thx!
Electronics Forum | Mon May 13 13:20:20 EDT 2019 | carlosbarron
Hi Dex, This is Carlos and I am having trouble for the camera show visual on screen. To haven't been able to troubleshoot because the machine doesn't have schematics or manual of any kind. Can you help on sending copies, please. Thank you, Carlos