Electronics Forum | Mon Mar 05 15:59:39 EST 2007 | jasont
Have you considered used equipment? We have several options you may want to consider; - 1999 MPM UP 2000/A HiE + 2003 UIC HSP 4797L + 1999 UIC GSM2 - 1997 Panasonic SPPV + 1997 or 2000 Panasonic MV2F + 1996 MPA-3F - 1998 Dek 265 GSX + 2001 Siemen
Electronics Forum | Thu Aug 31 18:58:37 EDT 2006 | chrisgriffin
Fastek, You are correct. I know of machines you can get for 25k that are in working condition. But if I was going to buy one used, I would want it refurbished and calibrated. I would also be interested in support and warranty. I don't know of an
Electronics Forum | Tue Aug 29 10:36:09 EDT 2006 | Chunks
With the UP2000 that has vacuum board hold down, the Grid Loc hoses defeat the vacuum in order for them to exit the work table. Big boards require more girds, thus more hoses. Set-up between large and small boards takes time to remove or add the gr
Electronics Forum | Thu Aug 31 19:40:22 EDT 2006 | cardinal
A couple things on the Grid-Lok system. They now offer a top-side edge clamping system. The edge clamping system works very well for warped, twisted boards etc.. Using this system in the auto mode also allows the pins to contour to the geography of
Electronics Forum | Mon Sep 12 09:26:00 EDT 2016 | awhite
Our MPM Up2000 HIE is having a communication problem with any upstream machine we place in front of it...i.e. conveyor, board loader, etc. It all started when we removed a conveyor from inbetween it and a board loader, and hooked those machines up di
Electronics Forum | Thu Aug 31 21:43:13 EDT 2006 | fastek
I don't sell them for $25K either but my point is they can be had for that price. In fact the last (2) that I had I purchased for $8K and $9K. I never have claimed to be the cheapest dealer around and it's not my intention......I only intend to be
Electronics Forum | Tue Sep 05 16:26:53 EDT 2006 | Bill
Thinking about this auto-mode on Grid-Lok..... Ok, the board is warped, lets say positively, the pins conform to the warped board... what about the effect on top side and squeegee pressure? It will be much higher and could damage stencils, right? Pos
Electronics Forum | Tue Aug 29 11:34:42 EDT 2006 | pr
WOW, for having never spent more than a drive by with the units and NEVER having set it up or used it, you are a wealth of info. who say's you can't learn anything from the fine smtnet archives? You definately have bean bags on the chin (mind) cause
Electronics Forum | Fri Sep 01 01:18:37 EDT 2006 | cardinal
How many of these printers have sold in the last three years? I have sold over 40 in the last 18 months. You can claim all the numbers you want. If you have the units to sell at $25K; then sell them. If you are selling them at $25K, you are selling
Electronics Forum | Fri Sep 08 16:12:38 EDT 2006 | Buzz
NO! We need to try to initiate the description of the criteria for requirements by developing a framework for the application architecture consistent with the planning corridor specified in our strategic initiative. Once bilateral goals are establi
