Electronics Forum | Fri Nov 26 05:28:27 EST 2004 | Joe
Hi, Thanks for the info. I have been told that the Panasonic nozzles are diamond tipped and as a consequence are quite costly. Do you know how many placements one of these nozzles would be expected to make? Would the nozzle fail by the tip crackin
Electronics Forum | Wed Sep 05 17:22:49 EDT 2012 | jorge_quijano
I remember to have the same issue with a S20 + F4 line, after several tries, we fixed all head nozzles from machines 1 thru 4 with the most commom configuration, and let the F4 machine with the automatic nozzle changer configured with common nozzles
Electronics Forum | Tue Feb 15 20:59:16 EST 2005 | ashley
Hello Snr Tech, kindly isolate the problem if it's coming from the indentified holder or the nozzles itself, by swapping between holders. there will be oxidisation on aluminium, from which your nozzles are made after a period of time. impurities, sr
Electronics Forum | Tue Oct 10 12:32:08 EDT 2006 | RLM
Larry, I have had this problem in the past. It turns out that there wasn't enough "Z" on our nozzle pickup locations. When a nozzle change occured the nozzle would not be fully seated on the Z-rod. When the Z-rod is driven down to pick the first part
Electronics Forum | Thu Aug 22 02:18:09 EDT 2002 | mjabure
Specify the nozzle size as 1.4 in both the nozzle allocation table and the PD, the nozzles will still pass center test as the size variation is still within tolerence.
Electronics Forum | Sun Feb 27 17:08:37 EST 2005 | //jh0n.
We're using 10MPF nozzles to pick 0603 components. I think I have noticed, that it does overlap. Is 08MPF the proper nozzle? These are also the only nozzles that I've had problems with - so this is probably the case.
Electronics Forum | Fri May 30 09:50:04 EDT 2008 | jdengler
Another sticky issue is that if you use after market nozzles especially mixed in with Fuji nozzles the Anti-Marking Illumination Disks can be different enough that the vision system will reject nozzles. Jerry
Electronics Forum | Fri May 30 09:53:19 EDT 2008 | cyber_wolf
"Another sticky issue is that if you use after market nozzles especially mixed in with Fuji nozzles the Anti-Marking Illumination Disks can be different enough that the vision system will reject nozzles. Jerry " Thats what I meant when I said they
Electronics Forum | Tue Aug 03 12:20:38 EDT 2010 | namruht
Is this on all 6 nozzles on those particular heads or just some. Try swapping nozzles with another head to make sure you do not have nozzle issues.
Electronics Forum | Mon May 21 08:51:14 EDT 2012 | fredc
We have been seeing this in the nozzles we have made. We will building all new LED nozzles out of teflon where physically possible. Many of the new Cree LED recomendations are for teflon nozzles. In some that teflon was not recomended teflon was the
We offer various kinds of high quality SMT nozzles, feeders, cutters, filters, etc. Sales1@kundasmt.com
Equipment Dealer / Broker / Auctions
Room 208 haochen building #286 dongping Industry Zone
Suzhou, 04 China
Phone: 0086-512-68364089