Electronics Forum | Mon Jan 15 15:56:51 EST 2018 | sarason
PI, My program PCBSynergy will program VIOS from a CSV file. https://pcbsynergy.com You can generate the CSV using Visualplace from your gerber file. https://www.compuphase.com/visualplace/visualplace_en.htm sarason
Electronics Forum | Thu Jun 22 17:17:27 EDT 2000 | Bill Schreiber
The U.S. Environmental Protection Agency (EPA) has finally taken a progressive position by creating the Environmental Technology Verification (ETV) Program to verifiy the environmental safety, user safety and efficacy of products prior to their purch
Electronics Forum | Wed Sep 15 12:02:19 EDT 1999 | Jim Trent
| Does anyone know the best way to program my Camelot glue dispenser off line? I really like the machine, it just takes me too long to program it. We do contract work so I can get gerber data for all (most) of my assemblies. I need to get these pro
Electronics Forum | Thu Apr 08 14:21:31 EDT 2004 | mnguyen
We are looking to buy a insertion line TDK AC-7 Axial machine and a VC-7AT Radial machine. I am curious if there are any software out there that can program the machines. Spoke with Aegis and circuitcam and they told me they do not have any software
Electronics Forum | Tue Sep 16 09:26:26 EDT 2008 | mi
Hello, I have programmed SMT placement for Mydata My9 machines. I have ported programs between Mydata-to-Mydata machines. Also from Mydata to AOI machine for SMT inspection. Is there a way to port a placement program from Mydata to Panasonic MSH2
Electronics Forum | Mon Nov 17 04:03:08 EST 2008 | griffin
If the whole board is shifted then it must be a problem with the clamping of the fixtrue to the machine or the board to the fixture, or the fiducial reading that is incorrect. Are the fixation of the board to the fixture the same in both programs? A
Electronics Forum | Mon Feb 02 17:02:48 EST 2009 | bigdaddysoy9
I have programmed one of each. The rules-based machine is about 6 years older than the model-based system, so It's probably not a fair comparison, but I prefer the model-based system by far. The model-based machine gives you a lot more flexibility an
Electronics Forum | Thu Mar 05 09:20:06 EST 2009 | pcbrown
We have a Testronics 504 and it will run existing programs fine. When we try to create new programs, the system locks up and we have to reboot, loosing the program. In effect, we can not create new programs. Testronics has tried to help with phone se
Electronics Forum | Fri Nov 06 16:20:59 EST 2009 | 11562knott
I've speced in CircuitCAM at 3 different company's since 1996 and wouldn't use anything else. When we program our Mydata using CAD data within 5 minutes we have a program + a couple more minutes to verify the color visual aids by station. When we rec
Electronics Forum | Thu Dec 20 12:14:37 EST 2012 | dhopps
If you go with MCS I would recommend using an MCS30. You would have to make sure that the E-Proms for host communication are installed in the MCS and the host module (software)as well. You would then need CadConvert to program and transfer programs
