Electronics Forum | Thu Oct 28 18:14:51 EDT 1999 | John Thorup
Try looking for paste contamination somewhere. Dirty stencil, printer table or fixtures. Placement table/fixtures. Reflow belt/conveyer. Reuseable finger covers, if used. Try covering the fingers with Kapton tape during different stages of the proc
Electronics Forum | Tue Jul 25 14:30:04 EDT 2017 | emeto
Looks like you have a great wetting of your paste :). Once body has been in contact with molten solder, the package could suffer damages on the body(outside and inside) and on the circuitry inside. It is considered a defect. I have seen that before a
Electronics Forum | Tue Aug 18 11:45:17 EDT 1998 | Zambri
| Bob | I have had problems with spotting on gold contacts for many years and have spent many hours working on ways to solve this problem. Once a source of the problem is found and corrected the next month another source will crop up (new operator o
Electronics Forum | Tue Feb 25 11:56:33 EST 2020 | slthomas
I think I'd opt for a stencil with everything already cut and then tape it if that didn't screw up your stencil gasketing. Then you just have to define the process for adding the optional parts and you can decide to use those apertures or not.
Electronics Forum | Mon May 04 21:54:14 EDT 1998 | Dave F
| I've never seen this before. Today, I got this tombstoning on Tantalum Capacitors (Okay, I saw that before) | Here's the part that seems weird to me: | -They didn't tombstone onto a termination - they went onto their sides! That's right, both ter
Electronics Forum | Mon Dec 13 19:34:09 EST 1999 | Steve Thomas
Thanks, gentlemen. All points well taken, and some hit pretty close to home. Our pick-and-place programmer assures me that coplanarity isn't the issue because the machine won't (or can't) place parts beyond an acceptable criteria. It's an Amistar
Electronics Forum | Wed Feb 26 13:26:24 EST 2020 | rgduval
I'd agree with getting a stencil fully cut, and taping the pads you don't want paste on. But, I'd also check with the people that will be doing the hand soldering to see what they prefer. Some people prefer soldering on bare pads, some prefer solde
Electronics Forum | Fri May 01 20:12:29 EDT 1998 | Steve Gregory
| I've never seen this before. Today, I got this tombstoning on Tantalum Capacitors (Okay, I saw that before) | Here's the part that seems weird to me: | -They didn't tombstone onto a termination - they went onto their sides! That's right, both ter
Electronics Forum | Wed May 22 15:56:43 EDT 2002 | stefwitt
The play of the tape is quite significant as I mentioned in an earlier thread. Tape width can vary between 8.1 +/- 0.2mm. Demos on 0201's are most likely done with 8.1 +/- 0.05mm tape. I guess you are referring to the cover tape pull, which can dispo
Electronics Forum | Fri Apr 13 22:38:19 EDT 2001 | edylc
Hi , Could you be seeing the nickel under the gold plating because you are removing some of the Gold with the Kapton Tape....?? You mean , the adhesive properties of the kapton tape will cause the gold plating on the gold finger to be somehow peel of
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411