Electronics Forum | Thu May 18 16:10:18 EDT 2006 | adlsmt
We did a tin bath on ours but it was provided for free by Nihon Superior so that is a no-brainer. It was better than taking a risk of having to dump the pot. If you cant get a free tin bath, then you should probably go ahead and fill it half way or s
Electronics Forum | Fri Oct 04 16:08:28 EDT 2013 | hegemon
Same idea but simpler execution. Verify Solder pot temperature. Verify Temperature of Solder as it leaves the nozzle. Verify preheating gets your PWB up to 90C-120C prior to soldering. Check machine speed, verify 4 seconds contact with solder at
Electronics Forum | Thu May 18 14:50:08 EDT 2006 | grantp
Hi, The bath is titanium coated, and the machine is only 2 years old, and was designed for lead free, so we know we don't need to change anything. The reason the supplier gave for suggesting the bath change is "other companies are doing it" and it'
Electronics Forum | Thu Dec 29 09:20:30 EST 2005 | Cmiller
We have tested SN100C and SAC305 in our selective solder machine (Ersa Versaflow). We wanted to test both alloys in the selective first because the investment in filling the pots is minimal. In our initial tests the SN100C alloy appears to be the bes
Electronics Forum | Wed May 09 10:40:10 EDT 2001 | davef
First, your primary side component pads should be designed according to SM-782A, "Surface Mount design & Land Pattern Standard". Next if you did that and your secondary side component pads are the same size as your primary side components, your diff
Electronics Forum | Tue Jul 27 14:09:51 EDT 1999 | JohnW
| | | We are currently using a 65/35 solder for our wave process but are considering switching to a 63/37 for a substantial cost savings. No one here seems to know why we everused a 65/35 formulation in the first place. | | | I understand 63/37 to be
Electronics Forum | Thu May 28 09:23:59 EDT 1998 | Chrys
| Hello, | | I need some users information about "hot air knife" after the wave | bath: | - Defects reduction ? | - In what kind of boards(TH/SMT SOICS ect.) it is applied ? | - Where can I purchase it as a retrofit (Soltec Delta 6622cc) ? |
Electronics Forum | Wed Apr 19 15:23:58 EDT 2023 | jamesatqkits
Hello All, We have a small selective solder machine from RPS, a Rhythm SS, purchased used with SN100C in pot. For a couple of years we have used this machine and gotten good results. We have been adding SN995 to the pot as it needed more solder. Then
Electronics Forum | Tue Jul 27 14:56:23 EDT 1999 | John Thorup
| | | | We are currently using a 65/35 solder for our wave process but are considering switching to a 63/37 for a substantial cost savings. No one here seems to know why we everused a 65/35 formulation in the first place. | | | | I understand 63/37 t
Electronics Forum | Fri Jan 18 15:34:51 EST 2013 | ccouture
if your solder wave machine has a removable solder pot, consider getting a second solder pot. So you will start with a brand new empty solder pot. Keep the current one with your current solder as a backup.
