From the main UPS window: [System setup] > [Drop down menus] > Machine > Configuration > Parameters > Axes => You are now on a page with 3 menus > on the left side menu [Axis choice] scroll down and mark [Transfer belts] > On the upper right menu [Configurable Values] > mark [Default maximum velocity] > record the number to the right > Change the number to 35 to start with > [Save] > Power Cycle the machine.
35 is the number we use at our GSM:s because of big QFP-304 0.5mm pitch components can easily move off their pads during belt transfers. You can test different numbers on Your machines until You are satisfied, normally something between 35-55 if Your concern is the belt speed.
It is possible that Your menus will look a little bit different depending on what UPS-version and OS-system the machine is runing on. But You should be able to get it right anyhow. Important: Don't change anything else here unless you know exatcly what you are doing, wrong values in some areas can damage the machine or make the machine not to function properly. Don't allow the operators to even see this page. Let us know how You are doing. /Sincerly
reply »