I have a Quad 2C I have been in the process of setting up. Currently everything seems to be working on the unit but I am having some vision inspection problems with it.
The vision system does comes on line and seems to work correctly. I have one board that loads and runs a complete inspection process on the CAD generated fiducials.
I am using Auto Program to create the board pick and place program and CAD fiducials.
The following is the problem I am having: With the exception of the one board that works everything else will not complete loading when I try to run it from Central Controller. It will load the board program OK if it does not have fiducials in Auto Program. With fiducials, it loads the board but stops on the “loading global fiducuals” and gives me an ICOS Data Error. If I eliminate the global fiducals in Auto Program the board loads OK and runs.
What is mysterious is I can not expain why I have one working board and get this error on the rest of them. I renamed the working board and when I generate a program on the new name, it does not work either.
I have tried loading the fiducials in different order. I have tried re orienting the board with different board offsets. But I always seem to get this error. I have tried replacing the dbf and idx files that looked like they had anything to do with fiducials in Auto Program.
I am assuming (but not certain) this is problem with the generate program function in Auto Program. I have done everything I can think of short of completely reloading it.
Can anyone tell me what the ICOS data error means or any ideas on this one?
Thanks in advance.
reply »