Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Philips CSM 46/60 Manuals

Views: 3196

#72347

Philips CSM 46/60 Manuals | 1 July, 2014

Looking for manuals on this machine. We have the operations manual. We are looking for the service manual. Also any information regarding the communication command language.

Thank you

Pete

reply »

#72349

Philips CSM 46/60 Manuals | 1 July, 2014

My program PCBSynergy will generate a file for this machine

http://members.iinet.net.au/~sarason/

The machine type is Yamaha YM6021 under the dropdown menus. The Communication control is a little on the difficult side and is not as extensive as what is available via the Keyboard. It also bears no resemblance to what would be described as a sensible monitor program. Really it is best avoided. The interface is hand-shaked RS232C and is fairly straight forward to get running. Hawker Richardson almost certainly would have a manual for the equivalent Yamaha machine a YM6021 or a YM60 or YM84. Also try the Assembleon Website. I was speaking to the South Asia Rep about 6 months ago and he was very approachable. (His name escapes me.) The mechanics of the machine are fairly easily understood as I had to fix a few bent shafts on my machine. However the disassembly was difficult. My machine ran a 80286 processor and had three heads. and spoke UFOS. It was not the same as described in the few sheets of paper I was given with the machine, and so I had to modify it before it would read in properly. If you need any other information feel free to mail me I may be able to provide it. Also there is a Yahoo group PicknPlace that has several CSM60 users in it they may also be able to help

rgeards sarason

reply »

#72352

Philips CSM 46/60 Manuals | 1 July, 2014

Thank you for your response! I was actually the guy who emailed you a few days back regarding the blank.jpg error message in PCBsynergy. I would really like to try it, but that error is preventing me. I don't know how to initiate communication. If I create the file, I don't know how to tell the CSM, "ok, get ready, here it comes!" I have all the information regarding local operation with the keyboard. Agreed, the mechanics are very easy to understand. Sounds like I have a similar vintage machine as you. I would really like to see a schematic of the power circuit. To see if the voltage can be tapped for different voltages. Best regards, Pete

reply »

Reflow Soldering 101 Training Course
High Throughput Reflow Oven
Component Placement 101 Training Course
Capillary Underfill Dispensing

Find Replacement SMT Nozzles and Feeders