GSM Discrete I/O Address List

Subscribe to Thread

I'm trying to configure the nozzle changers on my GSM1 machi... - Jan 17, 2016 by Tom

Here you are. If you need something else, PM me. I've brough... - Jan 18, 2016 by Deni

Thank you, Deni! Much appreciated. ... - Jan 18, 2016 by Tom

No problem. However, I am not sure why do you need I/O addre... - Jan 18, 2016 by Deni

Hi Deni, The changers were not mounted in the UPS softwar... - Jan 18, 2016 by Tom

The machine is running UPS 3.2.2c on OS/2 2.1. ... - Jan 18, 2016 by Tom

Tom

#75240

GSM Discrete I/O Address List | 17 January, 2016

I'm trying to configure the nozzle changers on my GSM1 machine because they were not configured when I bought it. I've figured out most of the setup with the UPS documentation, but I don't know what the I/O addresses are for the changers.

Does anyone know where in the UIC documentation I can find an I/O address map for the discrete I/O? I've searched through the UIC KB and documentation but I haven't found anything on it yet. I appreciate any suggestions, thanks.

reply »

Deni

#75243

GSM Discrete I/O Address List | 18 January, 2016

Here you are. If you need something else, PM me. I've brought to life all of our 4 GSM's...

Oh - just realized, this forum allows pic's only, so rename the file to 44936601.pdf after download...

Attachments:

44936601.bmp [1.2M]

reply »

Tom

#75244

GSM Discrete I/O Address List | 18 January, 2016

Thank you, Deni! Much appreciated.

reply »

Deni

#75245

GSM Discrete I/O Address List | 18 January, 2016

No problem. However, I am not sure why do you need I/O addresses? Normally you just select changers from a drop-down list...Which USOS version is your machine running on?

reply »

Tom

#75248

GSM Discrete I/O Address List | 18 January, 2016

Hi Deni,

The changers were not mounted in the UPS software; I suspect the previous owners did not use the changers in the machine at all and just kept the same nozzles in the head at all times. It was owned by TI so I think they just did one process with it.

In machine setup under changers, I tried using the "defaults" but this is address 1045H for mod1/2 locations. Had to change it to 1047H for mod3/4 location. Just tried it and I got the changers to operate manually and the machine zeros now with the changers mounted. When I had mounted the changers without I/O configured it would not zero presumably because it was not recieving the changer-down signals.

reply »

Tom

#75249

GSM Discrete I/O Address List | 18 January, 2016

The machine is running UPS 3.2.2c on OS/2 2.1.

reply »