Richard,
Are you trying to put different pcb's on the panel, or just step and repeating the same pcb across the panel?
Either way, the method is pretty similar.
For step and repeat, you need to create a panel/layout, using the panel fiducials. Then you insert the pcb into the panel (use the bottom left location). Then, there should be a "panelize" or step and repeat feature in the panel (I don't recall the exact terminology); TPSys will ask you how many boards by how many boards in the panel, have you teach the first board fiducials, and then the last board fiducials, and will then populate your layout with the stepped and repeated pcb.
For multiple PCBs in the same panel, it's a very similar process. Each PCB must be created separately. Then, create a panel, and insert the PCBs in their locations, teaching the fiducials as you go.
Cheers, ..rob
reply »