JUKI KE750e

Subscribe to Thread

Im trying to program our JUKI KE750e I have 6 components to ... - Jul 12, 2024 by ktm250rider

You might have incomplete data that not completely filled. ... - Jul 15, 2024 by Thomas

Surprisingly, i found my answer shortly after posting. I wa... - Jul 15, 2024 by ktm250rider

ktm250rider

#91148

JUKI KE750e | 12 July, 2024

Im trying to program our JUKI KE750e I have 6 components to place. The machine places the first 3 but then ends the program. Ive tried saving the program and deleting the 3 that are placed, and the machine will place the other 6. However, if i add a 4th, the machine still ends. Not sure why it wont move the next parts.

reply »

Thomas

#91154

JUKI KE750e | 15 July, 2024

You might have incomplete data that not completely filled. Sometime it doesn't pop out as error message when you exist to save the program. I would double checks the program again, make sure every info is fully done.

reply »

ktm250rider

#91155

JUKI KE750e | 15 July, 2024

Surprisingly, i found my answer shortly after posting. I was just staring at the main menu and there is a setting for start step, end step and total steps. The end was set to 3. Not sure why. When i changed it to 6 all worked out. However, on our second machine. I do have incomplete data. I cant get the component assigned to a feeder. Again, maybe i just need to stare at the machine because all other parts are showing as OK.

reply »