Printed Circuit Board Assembly & PCB Design Forum
SMT electronics assembly manufacturing forum.
Can Pick Up Misalignment or Bent Nozzle at Pick and Place Ma...
- Aug 01, 2004
by
Bent nozzle can result in vaccum leakage resulting in parts ...
- Aug 03, 2004
by
So are you saying there is no way the vision system will acc...
- Aug 05, 2004
by
Unless the machine rotates component after vision.
...
- Aug 05, 2004
by
mdm4ua
Dhanish,
There are a number of things to know before we can...
- Aug 05, 2004
by
The machine type is Fuji CP6.We have major issues with Netwo...
- Aug 05, 2004
by
Pls advise how the part thickness affects the placement for ...
- Aug 05, 2004
by
If your part height(thickness) is set too tall in the softwa...
- Aug 06, 2004
by
Sr. Tech
Try slowing the cam speed to 50% or so to start with. Al...
- Aug 06, 2004
by
Sr. Tech
Do you mean to say that the turrets can compensate for the h...
- Aug 06, 2004
by
Vinit
I have also heard both explaination from different Equipment...
- Aug 06, 2004
by
It depends entirely on the machine. Different machines use ...
- Aug 06, 2004
by
"I thought it was purely a mechanical up-down movement with ...
- Aug 06, 2004
by
Dhanish, on a CP6 if you have skew problems or missing parts...
- Aug 06, 2004
by
This could also be caused by a bad PD.
What vision are you ...
- Aug 10, 2004
by
John
Hi guys I havnt been on for a while so its nice to be bac...
- Aug 12, 2004
by
JOHNW
Dhanish