Printed Circuit Board Assembly & PCB Design Forum
SMT electronics assembly manufacturing forum.
we have a capacitor cracking on one of our boards, there are...
- Feb 02, 2005
by
First, we've seen no documentation that even addresses delta...
- Feb 02, 2005
by
davef
OK,
component wide portion runs with the conveyor, so real...
- Feb 03, 2005
by
The component orientation was just for the calculation. It ...
- Feb 03, 2005
by
davef
Try heating a blank board on a hotplate to 183 deg C. with a...
- Feb 03, 2005
by
Lets get to the simple things. Wave or Reflow? Wave solder...
- Feb 03, 2005
by
Just a basic suggestion....
Inspect the nozzle placing the ...
- Feb 05, 2005
by
Etienne Ellul
I see that this problem has been already raised in 1998, but...
- Feb 07, 2005
by
Etienne Ellul
we are still looking into possible causes, we have rigged up...
- Feb 07, 2005
by
Dougs