Printed Circuit Board Assembly & PCB Design Forum
SMT electronics assembly manufacturing forum.
It seems that every time we do maintenance on our CP6 windmi... - Feb 15, 2005 by Sr. Tech
I had a similar problem on another machine. It turned out t... - Feb 15, 2005 by
Lube on the nozzle shaft ? I didn't see anything saying to ... - Feb 15, 2005 by Sr. Tech
It wasn't a CP6. I don't know if the CP6 needs lube or not.... - Feb 15, 2005 by
I've seen this before. I had a CP6 doing this for a while, ... - Feb 15, 2005 by
I have also seen this before on a CP6. We had an issue on... - Feb 15, 2005 by
Hello Snr Tech, kindly isolate the problem if it's coming f... - Feb 15, 2005 by Fujispares
Check to see if its the same component everytime if so check... - Feb 16, 2005 by aj
I've just went thru cleaning all nozzles and I saw some of t... - Mar 01, 2005 by
Try checking your Z height and also make sure that they are ... - Mar 02, 2005 by
I bet SMT research has good tolerances lol ... - Mar 02, 2005 by International Electronics
I'm telling you i've bought the nozzles wound the wrong way ... - Mar 03, 2005 by
not nozzles - springs - DOH!!! ... - Mar 07, 2005 by
--IE, Funny.--- I "remember" kinda, from the early CP6 ye... - Mar 07, 2005 by engguy
Guys, Thank you very much for your responses. You have be... - Mar 08, 2005 by Sr. Tech
Ya know, The weird part is that we seem to have a real ba... - Mar 09, 2005 by Sr. Tech
Since this happens just after PM and you mentioned solvent i... - Jan 18, 2006 by
Since I have posted on this last, we have found that 99% of ... - Jan 18, 2006 by Sr. Tech
Sir, reverse wound springs do help this situation. I would a... - Jan 21, 2006 by
I have some old Fuji windmills here and I checked the useful... - Jan 24, 2006 by FredC
thats an expensive looking jig for a calibration that you do... - Jan 25, 2006 by
Doug, If you saw our calibration tool (Blue) it is for sett... - Jan 25, 2006 by FredC
i didn't see anything about setting shaft height there, only... - Jan 26, 2006 by
My mistake it was tip #2. I am not sure about Fuji's price ... - Jan 26, 2006 by
Quick question fellas, Why would you ever have to check y... - Jan 26, 2006 by Sr. Tech
Yes you should check your shaft height every now and then, o... - Jan 27, 2006 by
If your have enough hours on a machine that you have all the... - Jan 27, 2006 by