Printed Circuit Board Assembly & PCB Design Forum
SMT electronics assembly manufacturing forum.
It seems that every time we do maintenance on our CP6 windmi...
- Feb 15, 2005
by
Sr. Tech
I had a similar problem on another machine. It turned out t...
- Feb 15, 2005
by
Lube on the nozzle shaft ? I didn't see anything saying to ...
- Feb 15, 2005
by
Sr. Tech
It wasn't a CP6. I don't know if the CP6 needs lube or not....
- Feb 15, 2005
by
I've seen this before. I had a CP6 doing this for a while, ...
- Feb 15, 2005
by
I have also seen this before on a CP6.
We had an issue on...
- Feb 15, 2005
by
Hello Snr Tech,
kindly isolate the problem if it's coming f...
- Feb 15, 2005
by
Fujispares
Check to see if its the same component everytime if so check...
- Feb 16, 2005
by
aj
I've just went thru cleaning all nozzles and I saw some of t...
- Mar 01, 2005
by
Try checking your Z height and also make sure that they are ...
- Mar 02, 2005
by
I bet SMT research has good tolerances lol
...
- Mar 02, 2005
by
International Electronics
I'm telling you i've bought the nozzles wound the wrong way ...
- Mar 03, 2005
by
not nozzles - springs - DOH!!!
...
- Mar 07, 2005
by
--IE, Funny.---
I "remember" kinda, from the early CP6 ye...
- Mar 07, 2005
by
engguy
Guys,
Thank you very much for your responses. You have be...
- Mar 08, 2005
by
Sr. Tech
Ya know,
The weird part is that we seem to have a real ba...
- Mar 09, 2005
by
Sr. Tech
Since this happens just after PM and you mentioned solvent i...
- Jan 18, 2006
by
Since I have posted on this last, we have found that 99% of ...
- Jan 18, 2006
by
Sr. Tech
Sir, reverse wound springs do help this situation. I would a...
- Jan 21, 2006
by
I have some old Fuji windmills here and I checked the useful...
- Jan 24, 2006
by
FredC
thats an expensive looking jig for a calibration that you do...
- Jan 25, 2006
by
Doug,
If you saw our calibration tool (Blue) it is for sett...
- Jan 25, 2006
by
FredC
i didn't see anything about setting shaft height there, only...
- Jan 26, 2006
by
My mistake it was tip #2.
I am not sure about Fuji's price ...
- Jan 26, 2006
by
Quick question fellas,
Why would you ever have to check y...
- Jan 26, 2006
by
Sr. Tech
Yes you should check your shaft height every now and then, o...
- Jan 27, 2006
by
If your have enough hours on a machine that you have all the...
- Jan 27, 2006
by