Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Draining a Solder Pot-

Views: 8871

Does anyone one have any suggestions on what containers to u... - Sep 27, 2005 by Steve Combs  

Hi Steve, When I drain our wave solder pot in preparation fo... - Sep 27, 2005 by

Hi Jay, Have you used those methods before? The muffin tin ... - Sep 27, 2005 by Steve Combs  

Contact your solder supplier and ask if you can borrow the m... - Sep 27, 2005 by

Use "Bakers Secret" Teflon coated loaf pans to make the nice... - Sep 27, 2005 by davef  

your supplier should be able to provide you with all the nec... - Sep 28, 2005 by

Thanks to Stevezeva for hosting the pictures: Bakers Secr... - Sep 28, 2005 by

Yes, I've used the muffin tins. I drained a solder drag pot... - Sep 28, 2005 by

Thanks for everyones input. I'm sure others will find this ... - Sep 29, 2005 by Steve Combs  

How do you drain out the solder at the bottom ? I thought mo... - Oct 04, 2005 by

Sure, using the drain for the last portion, that's difficult... - Oct 05, 2005 by davef  

Just be prepared! Once you open the drain you may not be ... - Oct 05, 2005 by jdengler  

We use chrome bowls to drain ours we have done it many times... - Oct 06, 2005 by Marcus Wheeler  

Should be another thread but oh well, Marcus can you advise... - Oct 06, 2005 by RDR  

With what did you compare the drossing against ? Sn/Pb or ... - Oct 06, 2005 by

Hi Marcus, how are you enjoing SN100 ? It seams the SN... - Feb 21, 2006 by


Steve Combs

#36861

Draining a Solder Pot- | 27 September, 2005

Does anyone one have any suggestions on what containers to use to put the solder (lead) into? We used aluminum bread pans last time since we wanted to reuse the solder and that was not such a hot idea. It took forever to tear the pans apart to get the solder out. We did not use teflon coated ones because we were told the teflon would outgas toxic fumes. Any ideas are appreciated.

reply »

Jay Brower

#36862

Draining a Solder Pot- | 27 September, 2005

Hi Steve, When I drain our wave solder pot in preparation for loading a lead free alloy (SN100); I am going to use muffin tins dusted with baby powder or maybe a little high temp oil so that the solder doesnt stick to the tins. I know that this may take us some time to drain 450 pounds of solder, but I believe that in the end it will be better. I'd rather lift an ingot that weighs 1-2 pounds than one that weighs 25 pounds.

reply »


Steve Combs

#36863

Draining a Solder Pot- | 27 September, 2005

Hi Jay, Have you used those methods before? The muffin tin is a good idea as long as you buy enough. Thanks

reply »

Alan

#36864

Draining a Solder Pot- | 27 September, 2005

Contact your solder supplier and ask if you can borrow the moulds that they use when they cast the solder. We have done this before to empty one of our wave solder pots. We didn't have to coat the moulds with anything at all, just fill them up, cool and turn out.

Cheers,

Alan.

reply »


davef

#36865

Draining a Solder Pot- | 27 September, 2005

Use "Bakers Secret" Teflon coated loaf pans to make the nicest solder ingots that you have ever seen.

We hope you are using the term "draining the solder pot" euphemistically. Using the drain on the bottom of the pot is dangerous. [Too much can go wrong, don't do it.] You should be ladling the solder from the pot onto the pans.

Don't forget to turn-off the fire rods as they become exposed during this emptying process.

reply »

aj

#36870

Draining a Solder Pot- | 28 September, 2005

your supplier should be able to provide you with all the neccesary equipment.

reply »

SuMoTe

#36878

Draining a Solder Pot- | 28 September, 2005

Thanks to Stevezeva for hosting the pictures:

Bakers Secret pans are the way to go, I use the "bread loaf" size.

http://www.stevezeva.homestead.com/files/DrainingSolderPot.jpg

http://www.stevezeva.homestead.com/files/DrainingSolderPot2.jpg

Pray this doesn't happen to you http://www.stevezeva.homestead.com/files/HoldDownBolt.jpg

All done http://www.stevezeva.homestead.com/files/PrettySolder.jpg

reply »

Jay Brower

#36881

Draining a Solder Pot- | 28 September, 2005

Yes, I've used the muffin tins. I drained a solder drag pot. Steve makes a good point about the drain valve. When I drain my pot, I will be scooping out the solder and filling my tins.

reply »


Steve Combs

#36890

Draining a Solder Pot- | 29 September, 2005

Thanks for everyones input. I'm sure others will find this thread helpful. Steve

reply »

MikeF

#36971

Draining a Solder Pot- | 4 October, 2005

How do you drain out the solder at the bottom ? I thought most solder pots have a channel from the pump impeller to the bottom of the nozzle. When you get down to that point is that when you use the drain?

I've managed to not have to drain a big pot, but if I ever have to what is a good way to get at that last few inches?

Thanks, Mike

reply »


davef

#36973

Draining a Solder Pot- | 5 October, 2005

Sure, using the drain for the last portion, that's difficult to ladle-out, is fine. Be aware that the drain may not be as easy to close as you'd like.

reply »


jdengler

#36974

Draining a Solder Pot- | 5 October, 2005

Just be prepared! Once you open the drain you may not be able to stop the flow. Be sure that you get as much as possible out then have several pans empty and near by. On some pots it will look like there is very little left but you don't see it all.

Jerry

reply »


Marcus Wheeler

#36986

Draining a Solder Pot- | 6 October, 2005

We use chrome bowls to drain ours we have done it many times. They work like champ. I have never used the drain spout we just laddle it out. We are using the SN100C here, it is fanatastic. Quite a few process consideration must be made in order to get it to perform. But once the Engineering is done... it is very nice. Low drossing as well.

reply »


RDR

#36992

Draining a Solder Pot- | 6 October, 2005

Should be another thread but oh well, Marcus can you advise on the "process considerations" you speak of? I thought that the SN100C was a "drop in". I have a rep for this stuff coming to see me soon and your input if possible may be valuable.

reply »

Kris

#36999

Draining a Solder Pot- | 6 October, 2005

With what did you compare the drossing against ? Sn/Pb or SAC ?

reply »

GS

#39852

Draining a Solder Pot- | 21 February, 2006

Hi Marcus,

how are you enjoing SN100 ?

It seams the SN100's good reputation is growing day by day, is true also for you?

Many thanks

Best Regards...........GS

reply »

Software for SMT
IPC/WHMA-A-620 training Nasa Space Addendum
Now Online
311
Visitors
0
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

pressure curing ovens
Win Source Online Electronic Parts Distributor
Fluid Dispensing Aerospace

Solder Paste Dispensing