Printed Circuit Board Assembly & PCB Design Forum
SMT electronics assembly manufacturing forum.
Views: 5245
Hello all,
I am having some trouble with the conveyor spe...
- Jan 15, 2007
by
RLM
We have an oMniflow 7 as well, and looking at the calibratio...
- Jan 15, 2007
by
Dback
Dback is right. You're missing part of your manual. Once y...
- Jan 15, 2007
by
Real Chunks
This is a used oven, new to us. No product has been setup on...
- Jan 15, 2007
by
RLM
What test did you do to come to the conclusion that your con...
- Jan 15, 2007
by
Dback
Set the conveyor to run at 1 foot/minute and the conveyor mo...
- Jan 15, 2007
by
RLM
Not sure if this has any bearing on the problem but did you ...
- Jan 15, 2007
by
Yes, these 2 pins are jumpered together.
Thanks
...
- Jan 16, 2007
by
RLM
This 11 seconds is constant?
Seems like it's a clock issu...
- Jan 16, 2007
by
jdengler
I have found a screen in the software that appears to be som...
- Jan 16, 2007
by
RLM
Forget that idea. This is an informational screen and change...
- Jan 16, 2007
by
RLM
There is another screen where you can select the sprocket si...
- Jan 16, 2007
by
Dback
I checked this and it seems to pertain to the rail conveyor ...
- Jan 16, 2007
by
RLM
I believe the drive of the conveyor whether rail or belt is ...
- Jan 17, 2007
by