I am unaware of any industry standard for specifying apertures for SM stencils. I am aware of IPC-7525, Stencil Design Guidelines. You can obtain it from IPC [http://www.ipc.org].
Further, it seems like there is an article on stencil design every other month in one trade journal or another. Consider checking the article achives for such magazines [eg, SMT, Circuit Assembly, etc]. One example is "Step 4 - Printing", R Prasad, SMT Magazine, April 2001, p. 88.
Industry standard or no industry standard, it seems to be a risky proposition to issue production work prior to fully considering, evaluating, and resolving the differences between the requirements for assembling the product and capabilities of the production processes, including those of your partner, that you plan to use in assembling your product.
Much has been written about design for manufacture [DFM]. Earl Moon published several articles on the topic in the SMTnet Newsletter. Other DFM references are:
Manufacturing Processes, 8th ed., B.H. Amstead, P.F. Ostwald, Myron L. Begeman, John Wiley & Sons, 1987, ISBN 0-471-84236-2
Design for Manufacturability: A Systems Approach to Concurrent Engineering and Ergonomics, M. Helander and M. Nagamachi, eds., Taylor & Francis, 1992, ISBN 0-7484-0009-5
Anzivino, Rich, The DFM Design Philosophy, Printed Circuit Design, December 1994, pp. 14-18.
Webb, Scott E., Implementing DFM, Printed Circuit Design, December 1994, pp. 10-13.
Potechin, Jamey, Integrating DFM, Printed Circuit Design, November 1993, pp. 22-26.
Blankenhorn, James C., A Rose by Any Other Name Or, What is Design for Manufacturability?, Printed Circuit Design, August 1993, pp. 15-17.
LeBrun, Jim, Design for Manufacturing, EDN Products Edition, November 17, 1995.
Mraz, Stephen J., Curing Design Blues, Machine Design, November 7, 1994, pp. 69-72.
Pallanck, R., Sandberg, E., et. al, How to Make Concurrent Engineering Work, Part 9: Managing the Work Flow, Machine Design.
Baumgartner, Dan, Quick-Turn Design and DFM, Printed Circuit Fabrication, Vol. 19, No. 3, March 1996.
Jodoin, Claude J., Good Design Means Good Manufacturing, Printed Circuit Design, August 1994, pp. 34-35.
Jodoin, Claude J., Designer's Viewpoint, Printed Circuit Design, July 1994, pp. 36-37.
Jodoin, Claude J., Designer's Viewpoint, Printed Circuit Design, March 1995, pp. 58-59.
Jodoin, Claude J., Designer's Viewpoint, Printed Circuit Design, November 1993, pp. 40-41.
Glover, Rita, PCB Leapfrogs Into System-Level Design, Electronic Design, April 1st, 1996, pp. 83-84.
Dolberg, Schmil, Tomorrow's Tools for PCB Preproduction, Printed Circuit Fabrication, May 1995.
Silva, Joseph, High-Performance Design, Printed Circuit Design, March 1995.
Gentry, Teresa, Excellence in PCB Design, Printed Circuit Design, Vol. 10, No. 11, November 1993, pp. 16-21.
Kovarsky, Moshik, Tools of the Trade, Printed Circuit Fabrication, Vol. 19, No. 3, March 1996.
Neural-Net Autorouter Analyzes Layouts, Adapts Routing Costs, Personal Engineering, May 1995, pp. 21-22.
Lindgren, Russ, Design-Rule Checks Help Users Create Complex Layouts, Personal Engineering, May 1995, pp. 24-28.
Potechin, Jamey, The DRC Lie, Printed Circuit Design, August 1994, pp. 18-21.
Gomez, Dick, Design Reuse Accelerates Board Creation, Electronic Design, July 25, 1992, pp. 77-88.
reply »