Here's the end of Logicomm capture on Force COMM2 where it starts the Lantern system not active messages. Couldn't get attach to work.
Startup and earlier .ldx file loading omitted
ulLoadTasks(): Opening the RFS pseudo device driver ...
ulLoadTasks(): Device = 60000
ulLoadTasks(): Loading the object file ...
ulLoadTasks(): RFS Task Name = Calib.ldx
ulLoadTasks(): Getting the object file information ...
ulLoadTasks(): Allocating task memory ...
Found section code...size = 191998.
Found section strings...size = 21580.
Found section vars...size = 1660.
Found section literals...size = 490.
Found section zerovars...size = 44.
Found section const...size = 4.
Found section weak_externs...size = 20668.
ulLoadTasks(): Loading the object file ...
ulLoadTasks(): Storing initialization data ...
ulLoadTasks(): RN#1 rn_getseg size = 67c
ulLoadTasks(): pVarsInitDataAddr= 5300
ulLoadTasks(): Creating the task ...
ulLoadTasks(): ulTaskID = ac0000
ulLoadTasks(): task entry = 151a68
ulLoadTasks(): Closing the RFS pseudo device driver ...
vSMTStart: CpuGlobalPtr = 6fae68; BusGlobalPtr = 737ef8
vSMTStart: size of CPU_GLOBAL = 161514
vSMTStart: size of GLOBAL_TABLE = 452
vSMTStart: Start of VME shared area = 737ef8
vSMTStart: sizeof(MCOSTaskData)=4320;sizeof(MCOS_TASK_DATA)=80
Opening (de_open) mbox driver, unit #0 ...
Enabling (de_cntrl) mbox driver, unit #0 interrupts ...
Opening (de_open) mbox driver, unit #1 ...
Enabling (de_cntrl) mbox driver, unit #1 interrupts ...
vSMTStart: Tell USOS okay to initialize GLOBAL
vInitUPSGlobal: Ready for GLOBAL_VERSION_NUMBER
vInitUPSGlobal: Ready for FORCE VME MEMORY access code
vInitUPSGlobal: FORCE VME MEMORY access code = 8
vInitUPSGlobal: Ready for START address
vInitUPSGlobal: START address = 737ef8
vInitUPSGlobal: Ready for END address
vInitUPSGlobal: END address = 7fb3f8
vInitUPSGlobal: Ready to INITIALIZE memory
vSMTStart: UPS GLOBAL memory initialized
vSMTStart: Full Run debug mode NOT selected
vSMTStart: Simulation mode NOT selected
This is the LOADED timer exerciser running ...
Opening (de_open) timer driver...
Enabling (de_cntrl) timer interrupts...
Running (de_cntrl) polled clock...
vClockDevice: Timer Parameters: period = 1ms; priority = 6; address = 701648
vSMTStart: IOInit complete
pFindTaskData: found task data for STSK
pFindTaskData: found task data for PHYT
ulStartRequest: Task Name = PHYT; Caller's Task ID = b0000
pFindTaskData: found task data for PHYT
ulStartRequest: ulEventsReceived = 1
pFindTaskData: found task data for MSG_
ulStartRequest: Task Name = MSG_; Caller's Task ID = b0000
pFindTaskData: found task data for MSG_
ulStartRequest: ulEventsReceived = 1
vSMTStart: call vInitAxes
vSMTStart: call vInitMotion
pFindTaskData: found task data for CVI_
ulStartRequest: Task Name = CVI_; Caller's Task ID = b0000
pFindTaskData: found task data for CVI_
ulStartRequest: ulEventsReceived = 1
FidList = 6a25bc
vSMTStart: Start loading Machine Model data
FidList = 6a25bc
CompList = 691e70
pFindTaskData: found task data for MMDL
FidList = 6a25bc
CompList = 691e70
Lantern system not active. Heart Beat = 0
ulStartRequest: Task Name = MMDL; Caller's Task ID = b0000
Lantern system not active. Heart Beat = 0
pFindTaskData: found task data for MMDL
Lantern system not active. Heart Beat = 0
ulStartRequest: ulEventsReceived = 1
Lantern system not active. Heart Beat = 0
vSMTStart: wait for model load to complete
Lantern system not active. Heart Beat = 0
Lantern system not active. Heart Beat = 0
reply »