Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


  • SMTnet
  • »
  • Electronics Forum
  • »
  • GKG G5 presses have irregular drive alarms, sometimes they turn off and restart, sometimes they need to be unplugged from the ba

GKG G5 presses have irregular drive alarms, sometimes they turn off and restart, sometimes they need to be unplugged from the ba

Views: 874

#88314

The GKG G5 press has occasional drive alarms | 19 August, 2022

The GKG G5 press has occasional drive alarms, sometimes it turns off and restarts, sometimes it needs to be unplugged from the board cable at the back and the alarm returns after a period of production. What is the problem? Could any of you give me any advice here? Thank you very much!

reply »

#88327

The GKG G5 press has occasional drive alarms | 26 August, 2022

The drive and power supply were checked and were fine, but later I found that there was a problem with the J22 cable, which would alarm if I touched it. I suspected that the cable was damaged and planned to buy a replacement cable to try.

reply »

  • SMTnet
  • »
  • Electronics Forum
  • »
  • GKG G5 presses have irregular drive alarms, sometimes they turn off and restart, sometimes they need to be unplugged from the ba
convection smt reflow ovens

ICT Total SMT line Provider