Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

juki comments

Views: 3548

Just want to hear what comments might be said about newer 20... - Jan 04, 2006 by Mark  

We are currently runing a JUKI 750 and 760 as well as a 2060... - Jan 05, 2006 by

thanks ... - Jan 05, 2006 by Mark  

I wonder if you have any experience with mating 760 to 730... - Jan 05, 2006 by Mike ZIG  

Cannot speak to the 760, but we've been running 3 750's for ... - Jan 05, 2006 by

John, Outstanding.Thank you for very much. We are on the r... - Jan 05, 2006 by Mike ZIG  


Mark

#38818

juki comments | 4 January, 2006

Just want to hear what comments might be said about newer 2000 series Juki Placement equipment? Good, Bad, indifferent!

reply »

Steve

#38837

juki comments | 5 January, 2006

We are currently runing a JUKI 750 and 760 as well as a 2060. I can't say enough good things about the quality of the machines and service from JUKI. I've had zero downtime in the last 2 years due to mechanical breakdown and our machines run 18 hours per day. A year and a half ago we cut a Po to JUKI for a 2060 with matrix tray changer and it was installed and building full production within 6 business days. Very impressive.

reply »


Mark

#38838

juki comments | 5 January, 2006

thanks

reply »


Mike ZIG

#38839

juki comments | 5 January, 2006

I wonder if you have any experience with mating 760 to 730. What about suport for 700 series? You have 760 still running good.How many years they have to service machines after purchase. Is the 2060 significantly better than 760 regardless capacity? Do you know anyone selling GOOD 760 ?

Mike Gipos

reply »

John S.

#38840

juki comments | 5 January, 2006

Cannot speak to the 760, but we've been running 3 750's for seven years now. Never needed to call a service technician in. Juki is our benchmark for customer service. We run approximately 20 hrs per day 5 days a week. John S.

reply »


Mike ZIG

#38849

juki comments | 5 January, 2006

John, Outstanding.Thank you for very much. We are on the right road!

Mike Gipos

reply »

Software for SMT
Sell Used SMT & Test Equipment
Now Online
301
Visitors
0
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Capillary Underfill Dispensing
SMT Reflow Ovens
IPC/WHMA-A-620 training Nasa Space Addendum

IPC Training & Certification - Blackfox