Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
Placement Equipment and Long Boards

Placement Equipment and Long Boards

Subscribe to Thread

Which placement equipment in the market can handle boards th... - Apr 05, 2007 by Dirk Nuendyke

im looking at a universal spec that says there advantis ax7... - Apr 05, 2007 by WRONGWAY

Hi, The Samsung SM321 XLB can handle 20" x 24"... ... - Apr 05, 2007 by Mike Foster

Siemens with minor adjustments. I believe they even have a r... - Apr 05, 2007 by Doug Philbrick

The C5/C5d from Contact Systems can do more than 27" without... - Apr 05, 2007 by gregp

Sup, pix machine width you need props dawg! Dats how w... - Apr 09, 2007 by

Pick and place: * Fuji: The largest pcb size is 20" by 18" ... - Apr 09, 2007 by davef

Check the websites! ... - Apr 09, 2007 by

What websites?!?! This is not a search engine you know. Gu... - Apr 10, 2007 by Dr Shocker

Yes, that is indeed fact. You are a very intelligent, f... - Apr 10, 2007 by Dirk Nuendyke

hi we have an Essemtec FLX 2010 L that has a large board cap... - Apr 13, 2007 by pete

We are processing a 5x22" PCB using Juki "2010E and 2060E". ... - Apr 14, 2007 by hoss67

Dirk Nuendyke

#48887

Placement Equipment and Long Boards | 5 April, 2007

Which placement equipment in the market can handle boards that are 21" (539.5mm for you fuzzy foreigners) or more?

reply »

WRONGWAY

#48889

Placement Equipment and Long Boards | 5 April, 2007

im looking at a universal spec that says there advantis ax72 machine can go up to 25" board length with special kit

reply »

Mike Foster

#48895

Placement Equipment and Long Boards | 5 April, 2007

Hi,

The Samsung SM321 XLB can handle 20" x 24"...

reply »

Doug Philbrick

#48896

Placement Equipment and Long Boards | 5 April, 2007

Siemens with minor adjustments. I believe they even have a retro to go to 26" on some machines.

reply »

gregp

#48898

Placement Equipment and Long Boards | 5 April, 2007

The C5/C5d from Contact Systems can do more than 27" without loss of feeder capacity or throughput.

reply »

#48931

Placement Equipment and Long Boards | 9 April, 2007

Sup,

pix machine width you need props dawg!

Dats how we roll on the east coast!

Holla

reply »

davef

#48932

Placement Equipment and Long Boards | 9 April, 2007

Pick and place: * Fuji: The largest pcb size is 20" by 18" for pick and place; 18"x14" for chip shooters. Fuji NP XL series allows 27 by 23 inch boards using a conveyor. * MYDATA has machines that can be configured to 34" X 44" X 0.500" * HSP 4796A and GSM1/2 can handle board size up to 14" x 18" and 18" x 20" * Yamaha YV100 with a modified base plate can do 610 x 620 mm [24"x25"] * Mydata MY15 SMT machine can handle the size 600 x 600mm [23.6"x23.6"] * Contact Systems C5 series: 18" x 31" without loss of feeder capacity

reply »

dwarf flip (I'm actually considered a giant in my tribe)

#48935

Placement Equipment and Long Boards | 9 April, 2007

Check the websites!

reply »

Dr Shocker

#48940

Placement Equipment and Long Boards | 10 April, 2007

What websites?!?! This is not a search engine you know. Guess with little head comes little brain.

reply »

Dirk Nuendyke

#48941

Placement Equipment and Long Boards | 10 April, 2007

Yes, that is indeed fact.

You are a very intelligent, funny, handsome, man-of-the world! Thanks for the enlightenment.

reply »

pete

#49033

Placement Equipment and Long Boards | 13 April, 2007

hi we have an Essemtec FLX 2010 L that has a large board capacity of 600x700mm(23.6x27.5")

reply »

hoss67

#49048

Placement Equipment and Long Boards | 14 April, 2007

We are processing a 5x22" PCB using Juki "2010E and 2060E". Machines are spec'd as 18x20" cabable. We just needed to adjust a conveyor sensor (1 time) and ignore a few placement area warnings.

reply »