Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Depanneling Problems

Views: 4849

We have a problems with soldering in the PCB in the Solder W... - Feb 17, 2011 by Juliano B Ribeiro  

Humidity, Juliano? Try drying the boards pre solder; oven o... - Feb 17, 2011 by SheanDalton  

What kind of voids? There are voids from out gassing (moistu... - Feb 19, 2011 by KaHrpr  

Look at your fluxer as well (spray or foam?). You may not b... - Mar 02, 2011 by Reese  

I guess the problems are about humidity. How much time befor... - Mar 02, 2011 by Juliano B Ribeiro  


Juliano B Ribeiro

#63782

Depanneling Problems | 17 February, 2011

We have a problems with soldering in the PCB in the Solder Wave process. Our pcbs are failures in the solder (voids) in the throughole components. The main problems is in varistor components. what are the soluctions to problems?

tks

reply »


SheanDalton

#63784

Depanneling Problems | 17 February, 2011

Humidity, Juliano? Try drying the boards pre solder; oven or dry storage cabinet.

If this works, Eureka has good desiccant dry storage cabinets, http://www.atekllc.com.

Shean Dalton www.fhpreps.com

reply »


KaHrpr

#63794

Depanneling Problems | 19 February, 2011

What kind of voids? There are voids from out gassing (moisture) and voids from contamination and or poor solder ability ? If it is on one component I would look at the part. Also if it a big Varistor make sure the board is preheated properly.

reply »

Reese

#63856

Depanneling Problems | 2 March, 2011

Look at your fluxer as well (spray or foam?). You may not be getting ample flux over certain areas of the board. This can cause voids.

reply »


Juliano B Ribeiro

#63857

Depanneling Problems | 2 March, 2011

I guess the problems are about humidity. How much time before production we need to store in Dry Unit? We have the SD532-31 SUPER DRY gabinet and we will use to store the PCBs. Thank you for your answer.

reply »

Equipment Auction - Eagle Comtronics: Low-Use Electronic Assembly & Machining Facility 2019 Europlacer iineo + Placement Machine Test & Inspection: Agilent | Tektronix | Mantis Machine Shop: Haas VF3 | Haas SL-20 | Mult. Lathes
Get your business noticed
Now Online
118
Visitors
1
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

thru hole soldering and selective soldering needs
SMT feeders
One stop service for all SMT and PCB needs