Printed Circuit Board Assembly & PCB Design Forum
SMT electronics assembly manufacturing forum.
Views: 7143
Well, everything WAS going OK until I started setting up for... - Nov 15, 2011 by tim
A couple of things i would try: 1. Does function 30 give ... - Nov 16, 2011 by bobpan
Tim, Bob is the C series master so try this. ... - Nov 16, 2011 by aci
Bobpan, thank you for your speedy response. As to the items ... - Nov 16, 2011 by tim
Hi again Bobpan, One thing I noticed when I pulled the z-ro... - Nov 16, 2011 by tim
wow.....lets try some more things....... first....i think... - Nov 17, 2011 by bobpan
Thanks again Bobpan for all of your help. I hope some of my ... - Nov 17, 2011 by tim
Hi Bobpan, Regarding "second", the results of the test ar... - Nov 17, 2011 by tim
Tim, 1. You dont need the vacuum verify if the quadalign is... - Nov 17, 2011 by bobpan
Hi again Bob, I'll go by your item numbers: 1. OK, I'll ... - Nov 17, 2011 by tim
try this..... I think there is a coupling for the theta m... - Nov 18, 2011 by bobpan
Hi again Bob, I checked the theta motor coupling and the ... - Nov 18, 2011 by tim
Tim, The main controller card has a battery on it. Power... - Nov 21, 2011 by aci