I've inherited an old HTI screen printer, and have been told that it was in operation before it was sent to my shop.
I'm now trying to get it working, but, with no knowledge of the printer or the control system, I keep banging my head against it.
Anyone out there have some knowledge (or, even better, a manual) on HTI printers?
So far, I've managed to energize the system, and get the air going. I can lift the stencil head, and have the table moving. The other day, the table would shuttle in and out of the print area, but the squeegee arm wouldn't move. Today, I managed to get the table to shuttle in to the print area, and the squeegee arm to move to the front of the machine (I'm guessing it's prepared for a print cycle at this point); however, the squeegee arm will not cycle back to the back of the machine (or, I guess, perform a print), and the table won't shuttle back out of the print area.
I could also use some information on hanging the squeegees. I've figured out how to get the #1 squeegee on the machine, but, can't quite figure out how the #2 squeegee assembly attaches.
Thanks in advance for any information.
Cheers, ..rob
reply »