Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
Yamaha YM84 S2

Yamaha YM84 S2

Subscribe to Thread

Failing to origin the machine. On pressing ORIGIN, it moves ... - Aug 14, 2014 by Machman

Chapter 6 section 3-5 of the manual. If you don't have the ... - Aug 17, 2014 by Darby

Hi.. Darby thanks... I don't have Manual. plz send the same ... - Aug 18, 2014 by Machman

sent. ... - Aug 24, 2014 by Darby

Sorry, Tell me please. YM84 S2 is this CSM84 Philips or am ... - Sep 09, 2014 by max

Hi.. Max, It is Yamaha machine. ... - Jan 27, 2015 by

Hi, I read about the problem "243 x drift adjustment no good... - Sep 23, 2015 by Tercel

Hi.. Move the XY arm to the center of the machine. Tu... - Sep 24, 2015 by Machman

yes, Philips use Yamaha mechanics for CSM84 and we have thre... - Sep 24, 2015 by Tsvetan Usunov

Thank you for the fast response and help! Machine runs fine... - Sep 24, 2015 by Tercel

btw: Pots are VR16(x) and VR 17(y) on the left board and VR1... - Sep 24, 2015 by Tercel

Great News!! Happy to hear!! Yes. Location of these ports... - Sep 24, 2015 by Machman

Machman

#72572

Yamaha YM84 S2 | 14 August, 2014

Failing to origin the machine. On pressing ORIGIN, it moves a small distance and gives the message "ORIGIN INCOMPLETE" and displays error ...243:Y DRIFT ADJUSTMENT NO GOOD..." Please help.

reply »

Darby

#72582

Yamaha YM84 S2 | 17 August, 2014

Chapter 6 section 3-5 of the manual. If you don't have the manual send me your email and I'll send you the relevant section in pdf.

reply »

Machman

#72583

Yamaha YM84 S2 | 18 August, 2014

Hi.. Darby thanks... I don't have Manual. plz send the same at maninder.singh@cdil.com.

reply »

Darby

#72606

Yamaha YM84 S2 | 24 August, 2014

sent.

reply »

max

#72720

Yamaha YM84 S2 | 9 September, 2014

Sorry, Tell me please. YM84 S2 is this CSM84 Philips or am I mistake?

reply »

ermani9

#73402

Yamaha YM84 S2 | 27 January, 2015

Hi.. Max,

It is Yamaha machine.

reply »

Tercel

#74594

Yamaha YM84 S2 / Philips CSM 60 | 23 September, 2015

Hi, I read about the problem "243 x drift adjustment no good" on a Philips CSM 60 (my type) and other machines of this type. I have the same problem but no manual for the machine to solve it. Do you still have the manual where the "Drift ajustment" is described? It would be very kind of you if you could email me the part to tercel@tercel.org THX alot!

reply »

Machman

#74602

Yamaha YM84 S2 / Philips CSM 60 | 24 September, 2015

Hi..

Move the XY arm to the center of the machine.

Turn on the servo then immediately hold “LOWER” then press “ORIGIN”.

You should see the message now on the screen “DRIFT CHECK”.

The arm will start to drift without an emergency condition occurring.

During this time, balance the Pots on the Driver Board which adjust the DRIFT for XY&R.

I do not know which Driver board you have, so I cannot tell you the Pot number, but

usually VR16 is X, VR17 is Y.