Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Is anyone conformal coating flex circuits?

Views: 2783

I have a customer that is requesting their flex circuit be c... - Jul 01, 2015 by shannond  

have done it in the past, used silicon as it will flex,, how... - Jul 24, 2015 by CPI  

How many times does it have to flex. There are acrylic confo... - Jul 29, 2015 by RPoor  

Commonly done with Parylene. ... - Sep 08, 2015 by Lou  


shannond

#74160

Is anyone conformal coating flex circuits? | 1 July, 2015

I have a customer that is requesting their flex circuit be conformally coated. Is this something that is done? Which coating would stand up to the stresses of flexing? Wouldn't that put stress on the components? Thanks! Shannon

reply »


CPI

#74273

Is anyone conformal coating flex circuits? | 24 July, 2015

have done it in the past, used silicon as it will flex,, however its not the most robust material! tends to peel/flake off.

reply »


RPoor

#74290

Is anyone conformal coating flex circuits? | 29 July, 2015

How many times does it have to flex. There are acrylic conformal coatings that can be bent once to 90 degrees or so

reply »


Lou

#74515

Is anyone conformal coating flex circuits? | 8 September, 2015

Commonly done with Parylene.

reply »

SMT spare parts - Qinyi Electronics
best reflow oven
Now Online
58
Visitors
4
Members

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Free Webinar Surface Cleanliness Assessment
FPC* - Fluid Pressure Control - Dispensing Pump
Voidless Reflow Soldering

Comprehensive Analytical Services and Support