Glue dispensing machine that you recommend? IN-LINE SMT

Ok i must be missing something. You are using a dek 03i screen printer for glue and it's not fast enough? there is no glue dispensing machine that i know of that will ever be faster then a screen printer at doing glue dots

reply »

> A dispensing glue machine that you > recommend? > > Currrently I am using a DEK 03iX > for this operation, but cycle time is too slow, > so I am looking for a glue dispensing machine, > fast and with very good accuracy.

The fastest that I have seen would be the spider from Essemtec. Probably worth taking a look at.

http://www.my-smt-spider.com/

reply »

I would start my search with the Camalot Prodigy or used Camalot dispensing machine.

reply »

GPD-Global excellent platforms and pump technologies.

reply »

Before you buy glue dispensing machine, you need tell the supplier two question as below: Two questions before purchase

1.What’s type of glue do you use ? What’s the base characteristic ? A)One-component or two-component (A&B glue)； B)What is the AB ratio if two-component. C) What’s the viscosity and density . D)How long does it start to curing , and what is the completely curing time . E)What’s the packing of the glue . 2.What’s the glue process technological requirement ? A)What is the glue accuracy with each product ? B)What’s the purpose of gluing ? Filling , sealing ,paste,insulation, moisture proof ? C)How to glue the product .

Because the glue information will effect the machine if need add some othe function like heater , vacuum, cleaner. Price is not all the same

reply »

Here is what is selling on the SMTNET http://www.smtnet.com/mart/index.cfm?fuseaction=browse_mart&category=9&type=&mfg=&condition=

It can give you idea about the brands out there.

reply »