Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


EMERALD X with LCS - PCB output problem

Views: 817

#81235

EMERALD X with LCS - PCB output problem | 15 October, 2018

I have an Emerald X machine (by Assembleon) with an LCS. I start production. The first PCB board runs to the end of the LCS (item 1). Each subsequent stop is BEFORE LCS (item 2) - I have to remove it manually. And so until the production reset - then the FIRST PCB board again runs until the end of LCS and each next stops before it. The limit switches are operational, configuration OK (number of plates to be produced, no device for receiving PCBs, etc.). Anyone can help? What signal and what is the feeder waiting for?

Attachments:

reply »

#81462

EMERALD X with LCS - PCB output problem | 20 November, 2018

up.

reply »

#81894

EMERALD X with LCS - PCB output problem | 4 February, 2019

My topaz X does the same thing. Hope someone can explain this. I have to toggle the button every single time after the first board.

reply »

Electronics Experts Needed - Contract Jobs - We have Electronics Auditor positions available now!

ultra low humidity MSD storage

flying probe test services