Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


QSV1 Plus CAN card failed memory test

Views: 1974

#84919

QSV1 Plus CAN card failed memory test | 26 May, 2020

Hello, I am having trouble the QSV-1 PNP machine. On boot it had trouble connecting to the RT computer as it was hung on a message saying something along the lines of, "Establishing connection to RT computer".

After several restarts we still could not get that working. Next step taken was that the keyboard and monitor were connected to the RT and we got a CMOS battery low message. (other error too but they went away after reseating cards and double checking connections, forgot what that other message was, sorry) After another reboot, we are left with the following messages:

ERROR- CAN Card Failed Memory Test

Warning: QAlign1: Device timeout occurred

QAlignDevice1: System Error #1

Warning: QAlign2: Device timeout occurred

QAlignDevice2: System Error #1

MVS Unit 1 Initialization Failed Selecting Camera

TepController1 Initialization in progress...

FactNet controller warning - Buffer FULL

Any help or suggestions are greatly appreciated. Thank you

reply »

#84920

QSV1 Plus CAN card failed memory test | 27 May, 2020

The motherboard bios settings are incorrect. For me to help you please email me. My email address is on my website.

www.precision-repairs.com

Thanks, Bob

reply »

SMT Machines china

IPC Certification Training Schedule IPC Questions and answers