MPM UP2000 Vision Calibration

Subscribe to Thread

I recently purchased a used MPM UP2000 printer that I'm gett... - Jul 01, 2020 by Zac

I enclose a piece of instruction - here I think the offset i... - Jul 03, 2020 by Michał

Thank you Michal but unfortunately the images have not come ... - Jul 04, 2020 by Zac

I didn't get anything - send it to ... - Jul 05, 2020 by Michał

Zac

#85134

MPM UP2000 Vision Calibration | 1 July, 2020

I recently purchased a used MPM UP2000 printer that I'm getting up and running. It's in very good condition and other than a worn out auxiliary on the main power contactor seems to be all working correctly. I've got it operating in demo/dry run mode and I can see that the vision alignment is incorrectly offsetting by perhaps 0.5mm in the y axis.

Apparently the previous owner/operator used to manually program in some kind of offset in each file but I don't know the specifics.

We do have the calibration plate and stencil but I've been unable to find any specific overall vision calibration menu or procedure documentation. Is anybody able to shed some light on this?

reply »

Michał

#85144

MPM UP2000 Vision Calibration | 3 July, 2020

I enclose a piece of instruction - here I think the offset is set. Pages are not in turn, but you can handle it?

Attachments: