Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Head Fuji H24G

Views: 334

#85192

Head Fuji H24G | 11 July, 2020

During H24G head calibration, the following error appears: "814A000 Hybrid calibration measurement results exceeds range error" Unfortunately the head has already been sent to the mark however the error continues. Can someone give me some tips on how I can solve the problem?

reply »

#85345

Head Fuji H24G | 30 July, 2020

If there is no visible fault on the affected Shaft, perform maintenance on the Head. Replace Filter and exchange the Mechanicial Valves or replace the O-Rings on it.

reply »

#85347

Head Fuji H24G | 30 July, 2020

thanks, i will do what you advised and check the results

reply »

Flexible pick & Place

best reflow oven