Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


QSP-2 Disable gantry 2

Views: 442

#86241

QSP-2 Disable gantry 2 | 9 February, 2021

Hello Gents I have a problem with the head on gantry 2. I think it needs replacing but in the meantime Can anyone on the forum tell me how to disable it so the machine will initialise and run gantry 1 Ive been told it can be done but they cant remember how to do it Help would be much appreciated Best Regards and stay safe James

reply »

#86243

QSP-2 Disable gantry 2 | 9 February, 2021

You have to disable some lines in the machine.cfg file. If you do this....save the original before modifying it. I think you disable the gantry/head and the mei for Gantry 2.

reply »

#86245

QSP-2 Disable gantry 2 | 9 February, 2021

Thank you bobpan much appreciated I will give it a go Regards James

reply »

#86261

QSP-2 Disable gantry 2 | 10 February, 2021

I found a proper procedure to do this. Its rather long. Go to http://www.precision-repairs.com and email me and i will send it to you.

Bob

reply »

Voidless Reflow Soldering

 Reflow System