Dear Upinder, While reading the posts at the SMTnet forum I noticed your post pertaining to Curing ovens for use with Conformal Coatings which require regulated relative humidity to activate the cure. My company, ETS, is the manufacturer of Nordson's curing ovens which are sold with the Select Coat, conformal coating line. We would be very interested in competing for your business but I will need more information about your process, like throughput requirement, board size, coating used, time required to cure at 80% humidity and 80 C, etc. Please contact me so we can discuss this project further. Depending on throughput requirements we have an inline, low to medium volume oven that I can offer you for $36,000.00. We also have larger systems available. Sincerley, Brian Stumm ETS, LLC 3939 N. Freya St. Spokane, WA 99207 509-483-0900 (voice) 509-483-0331 (fax) ets@eznet.com (e-mail) | hi all. | I am looking for a oven which can cure the conformal coating providing heat and the humid atmosphere. I am looking for a temperature range of 60 deg C to 80 deg C and a humidity range of around 80%. | Can anybody refer to me the right vendors to go to. | Thanks | Upinder
reply »