Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
GPD off line programming

GPD off line programming

Subscribe to Thread

Hi All; We are having problems finding software for off l... - Jan 22, 2002 by Carl

Start with the following: * Aegis ISC (Circuit CAM) * Mit... - Jan 22, 2002 by davef

Thanks. ... - Jan 23, 2002 by Carl

Hello Carl, Smart Sonic has introduced the Assembly Modul... - Jan 28, 2002 by Frank Grimard

The product mentioned by SmartSonic (stencil cleaner maker) ... - Jan 28, 2002 by PeteC

Unicam has an interface that will program the dispense machi... - Feb 08, 2002 by DOD

CircuitCAM is a Partner with GPD and worked along with GPD t... - Feb 28, 2002 by

Carl

#18698

GPD off line programming | 22 January, 2002

Hi All;

We are having problems finding software for off line programming of our GPD machine. We have talked to GPD and no luck.

Any leads out there?

Thanks Carl B.

reply »

davef

#18703

GPD off line programming | 22 January, 2002

Start with the following: * Aegis ISC (Circuit CAM) * Mitron (GenRad) (CIMBridge) * CAE Technologies (C-Link)

reply »

Carl

#18707

GPD off line programming | 23 January, 2002

Thanks.

reply »

Frank Grimard

#18737

GPD off line programming | 28 January, 2002

Hello Carl,

Smart Sonic has introduced the Assembly Module for off line programming of assembly equipment such as GPD. You can see it on the Smart Sonic website: http://www.smartsonic.com

Click on the AOI/StencilScan and GlueScan link.

If you have any questions, feel free to contact me at: 1(800) 906-4407 or bill@smartsonic.com

Regards, Bill Schreiber

reply »

PeteC

#18740

GPD off line programming | 28 January, 2002

The product mentioned by SmartSonic (stencil cleaner maker) is from ScanCAD International. See http://www.scancad.com

reply »

DOD

#18833

GPD off line programming | 8 February, 2002

Unicam has an interface that will program the dispense machine from GPD and the ouput has been validated by GPD.

reply »

Jeff

#19013

GPD off line programming | 28 February, 2002

CircuitCAM is a Partner with GPD and worked along with GPD to create the interface to support their dispensers.

reply »

SMTnet
»
Electronics Forum
»
GPD off line programming

World's Best Reflow Oven Customizable for Unique Applications

High Precision Fluid Dispensers

"IPC training online, at your facility, or at one of our worldwide training centers including our brand-new training center in the Twin-Cities area of Minnesota. Blackfox Training."