In the past year I was responsible for developing and leading a Team focused on AOI, Evaluation, Justification, and with a full ROI required, supporting a HMLV manufacturing environment.
If you have in these economic times the additional resources to go off and conduct such a study..I highly recommend you do so. If not I'll share some of the highlights of our evaluation which can possibly help in your decision making. First we targeted a price range based on a budget amount of 140-160K. Several Key Suppliers were identified per our initial quoting activities and supplier response, then invited to face off in an 8-12 week eval., Cyber, V.I. Technologies, and CR Technologies (now Photon) were invited to the show. The measurable were identified and an extremely complex assembly was delivered to each Supplier, assembly had 48,000 opportunities. Multiple BGA's, 0402, 16mil., 0603 resistor networks, and more. Big board 18 X 21. These were the types of assemblies produced on a daily basis.
One of the main AOI deliverables among many was the ability to generate an NPI program that would require minimal first pass adjustments, with little impact to production requirements and scheduling, high capture rate, and low false calls, flexible quick turn support. A machine able to significantly lower the first article inspection times, post reflow, with ability to identify solderabilty and joint integrity as well as absence, presence, polarities, and component identification. Limiting the down time associated with first article inspections, and offer ability to lower DPMO's through continuous process improvements and early defect detection.
I got ready to give you a brief a summary of each Suppliers performance/issues and thought it better to keep those details offline and simply tell you which supplier was chosen and a brief summary of why.
If you'd like to know more of the particulars of the evaluation you can give me a call.
The AOI Team identified CR Technologies as best of the bunch in the price range given. It performed well with the lowest programming times, lowest false call rates, and the ability to identify and confirm solder integrity of visible solder joints. User friendly software, color system. When we were in the final phases of evaluation, head to head, the CR identified an incorrect PBGA based on its optical recognition/identification capabilities, it identified 1 incorrect number out of as many as 30 characters in the components legend where as the competitor passed the assembly. The run was 15 boards, and it was an 8 time user. Imagine the rework and head-aches that would have occurred on that one.
The machine has been installed and in an offline production/NPI operation for 9 months will little or no issues. It helped signicantly reduce total DPMO's and increase first pass yields associated with NPI builds and production level builds. Technical support, and response time has room for some improvement. But, with an uptime of high 98% range, not many calls have been necessary.
I hope this has helped a little, if you'd like to understand more of the evaluation measurable's and how to kick off an effort like this...give me a shout.
Scott
reply »