Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Press Fit

Can anyone advise how to determine the right hole diameter f... - Apr 03, 2005 by

Look here: * ... - Apr 04, 2005 by davef  

the pin manufacturer usually recommends the proper hole size... - Apr 04, 2005 by

Haran

#33503

Press Fit | 3 April, 2005

Can anyone advise how to determine the right hole diameter for a Press Fit connector's lead based on the lead compliant section?

reply »


davef

#33521

Press Fit | 4 April, 2005

Look here: * http://www.assemblymag.com/CDA/ArticleInformation/features/BNP__Features__Item/0,6493,140679,00.html

* http://www.circuitree.com/CDA/ArticleInformation/features/BNP__Features__Item/0,2133,136322,00.html

reply »

jimih280

#33522

Press Fit | 4 April, 2005

the pin manufacturer usually recommends the proper hole size. the hole diameter should be from .001" to .003" undersize depending on the design of the contact area on the pin.

reply »

Jade Series Selective Soldering Machines
IPC/WHMA-A-620 training Nasa Space Addendum
Now Online
111
Visitors
1
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Get your business noticed
pressure curing ovens
SMT Reflow Ovens

Equipment Auction - Eagle Comtronics: Low-Use Electronic Assembly & Machining Facility 2019 Europlacer iineo + Placement Machine Test & Inspection: Agilent | Tektronix | Mantis Machine Shop: Haas VF3 | Haas SL-20 | Mult. Lathes