Printed Circuit Board Assembly & PCB Design Forum
SMT electronics assembly manufacturing forum.
I am looking for all the reasons why operators and stores mu...
- Apr 19, 2005
by
mirrin
Here is one reason- It eliminates the viscosity change durin...
- Apr 19, 2005
by
RDR
Try printing while the paste is cold.....you get nothing but...
- Apr 19, 2005
by
You should follow your solder paste supplier recommendations...
- Apr 19, 2005
by
davef
usual solder cream has a viscosity above 800 000pas
at 25�C...
- Apr 20, 2005
by
Besides poor printing using cold solder paste will also caus...
- Apr 22, 2005
by
And don't re-refrigerate the paste. It's fine left out at ro...
- Apr 22, 2005
by
As Steve said do not re-refrigerate. You can also take the ...
- Apr 25, 2005
by
jdengler
The viscosity decrease on warming is one of the main reasons...
- Apr 27, 2005
by
AndyMackie
is there any relation between solder paste viscosity and the...
- Apr 27, 2005
by
devilhitam
Moisture will condensed on your paste if the temperature dif...
- Apr 29, 2005
by