ESD Mat
Company Information:
Name: |
ESD Mat |
Offered by: |
|
ESD Mat Description:
Thickness: 2mm/3mm ØStandard Dimension (W*L): 0.6m*10m/ 0.8m*10m/ 0.9m*10m/ 1.0m*10m/ 1.2m*10m ØColor: Green/Black, Blue/Black, Grey/Black, Green/Green, Black/Black, Blue/Blue ØØØAnti-static rubber mat should be laid out in the workshops and advanced laboratories for microelectronic industries such as electronic semi-conduct devices,electronic computers,electronic communication equipment and integrated circuits etc. To eliminate damages caused by static electricity.When anti-static rubber mat are laid out and grounded,the working surface will discharge the static electricity of human bodies so that a near-equipotential can be maintained for ESEDS tweezers,tools,utensils and instruments, through which human bodies contact the working table and static sensitive devices(SSD) are free from broadband interference produced by static discharging such as triboelectrification etc. Static fuction: •Upper layer: 10E7~10E9 ohmS, static dissipative •Bottom layer: 10E3~10E6 ohms, conductive •Volume Resistance: 10E7~10E10 ohm ØAbrasion Rate: ��0.02g/cm2 Static decay time: <0.5s Physical Properties: Tensile strength: 3.6Mpa Elongation at break: 188% Tear strength(Right angle type):20.6KN/M The brittleness temperature by impact: (no cut)-250�� : no damage Resiliency(trial sample used of 6 layers): 14%ESD Mat was added in Aug 2008
ESD Mat has been viewed 254 times