TSM N70 Series Nitrogen Convection Reflow Ovens
Company Information:
Name: |
TSM N70 Series Nitrogen Convection Reflow Ovens |
Category: |
|
Offered by: |
|
TSM N70 Series Nitrogen Convection Reflow Ovens Description:
All in One N2 Reflow Oven.
A next generation reflow oven that realizes ultra-low power consumption, the lowest N2 consumption and a high efficiency flux collecting system complying CO2 emission regulations.
N2 Generator Fixing Type
- Easy Maintenance- Application of high durability solenoid valves allows easy maintenance.
- Supply high purity N2 Gas by simply turning on the power supply
- Allows a stable supply of N2 gas with high purity and low dew point
N2 Generator Moving Type
- Compact N2 Built in N2 generator developed by TSM with our own technology, it alows the N2 reflow to be used easily at any location
- Available 3 models, 10Nm³, 12Nm³, 15Nm³
- Part per Million (ppm) according to air pressure when applying a built in PSA
Example of Line Installation
TSM N70 Series Reflow Ovens
Description |
N70-I82 |
N70-I92/93 |
N70-I102s |
N70-I103 |
---|---|---|---|---|
Apparent power(kw) |
44kw |
49kw |
49kw |
57kw |
Average power consumption(kw) |
Approximate 10kw |
Approximate 13kw |
Approximate 13kw |
16kw |
Operating voltage(V) |
3Ø 380V 50/60Hz, 3Ø 220V 50/60Hz, |
|
||
Operating Current(A) |
64A(110A) |
75A(129A) |
75A(129A) |
88A(152A) |
Outline dimension (LxWxH) |
196.06"x55.91"x57.09" |
218.89"x55.91"x57.09" |
197.64"x55.91"x57.09" |
231.10"x55.91"x57.09" |
Weight (kg) |
4365lbs (1980kg) |
4607.66lbs (2090kg) |
5732.01lbs (2600kg) |
5732.01lbs (2600kg) |
Number of heating zones |
8 zone |
9 zone |
10 zone |
10 zone |
Heating Zone Length |
105.12" (2670mm) |
117.32" (2980mm) |
109.45" (2780mm) |
129.92" (3300mm) |
Number of cooling zone |
2 zone |
2/3 zone |
2 zone |
3 zone |
Cooling Method |
N2 atmosphere |
N2 atmosphere |
N2 atmosphere |
N2 atmosphere |
Flux treatment |
Cooling zone |
Cooling zone |
Entrance+ Cooling zone |
Cooling zone |
PCB Transfer Speed |
0.3-1.6m/min |
|||
PCB transfer direction |
Left to right, right to Left |
|||
Fixed Conveyor Rail |
Front Rail (Rear Rail) |
|||
PCB Dimension (mm) |
2”- 16” (18”, 20”, 22” option) / 50-410 (460, 500, 560 Option) |
|||
Conveyor belt height(mm) |
885-920 mm from floor (normally 900 mm) |
|||
Temperature meter |
16ch |
20ch |
20ch |
24ch |
Hot Air Speed |
Pre-heat & reflow Approximately 0.5-4.0m/sec |
|||
PCB drop detection |
Photo sensor |
|||
PCB stop detection |
Photo Sensor |
|||
Auto stop |
Stops after No-load for 20-60 minutes since the system turns off |
|||
Oxygen connection control |
O2 Analyzer |
02 Analyzer |
02 Analyzer |
02 Analyzer |
Nitrogen concentration indication |
O2 Controller |
O2 Controller |
O2 Controller |
O2 Controller |
Nitrogen consumption |
12-15m²/h (Based on 500ppm) |
|
||
Alarm monitor |
PC monitor indication/ Emergency stop/ conveyor problem/ Cover opened/ Board drop alarm/ board stop alarm/ Abnormal temperature alarm/ Thermal Alarm/ abnormal % ppm/ N2 presure |
|||
Others |
PC, UPS, Anti-warp conveyor or Mesh belt(option) |
TSM N70 Series Nitrogen Convection Reflow Ovens was added in Jun 2013
TSM N70 Series Nitrogen Convection Reflow Ovens has been viewed 6127 times
9 More Products from Apex Factory Automation :