SM-620-500 Guillotine type PCB Separator

SM-620-500 Guillotine type PCB Separator Description:

Categories	Guillotine type PCB Separator
Album	View larger image
Brand	SAMTRONIK
Model	SM-620-500
Shear Length	0-500mm
Shear Width	0-unlimited
Shear Thickness	0.2-3.0mm
Shear Speed	one segmentation per second
Blade Size	356×45×6mm
Height of component	≦15mm,when component is on upper side ≦19mm, when component is on back
	More
Download DOC
Update Time	2020-11-13

DETAIL INFORMATION

SM-620-500 PCB Depaneling Machine

Application

Separate precise SMD thin board, aluminum PCB, for special board , please check with Service.

Introduction

Apply latest pneumatic design of light weight, the

PCB could be separated in one time, with minimum

internal stress, especially suitable to separation of

precise SMD or thin board. Unlike double round

blade PCB separator, there won`t be any

bow wave or micro crack generated.

It uses wedge cutter to shear PCB in line, internal

stress decreases to lowest point, even the sensitive

SMD modules or capacitance still won`t be

influenced, then potential risk on quality is

minimized.

Cutter blade applies SKH-11 high speed steel

imported, also suitable to separate PCB without

V-slot

Features

1. Bouble straight blade, highly suitable to separate SMD thin board and aluminum PCB ;

2. Guillotine type, for PCB of thickness 0.2 to 3.0mm, cutting moving distance 1 to 3mm, safe operation;

3. keep internal stress within 80-180Ue, to avoid micro crack and damage to precise components;

4. able to shear edge of V-slot, distance from the component should ≧0.3mm ;

5. shear rate is one segmentation per second, control by foot-plate pneumatic switch ;

6. with calculation function, obvious vision on productivity ;

7. shear blade group is started passively, shear line and position can be handled safely ;

8. shear not by rolling blade, no dust, no motor drive, no pollution of carbon dust ;

9. shear is not by blade friction, so there is no residue from blade ;

10. Shear Blade warranty 6000000 times, no need electricity supply, then no consumption on electric equipment;

11. Air pressure 0.4-0.6Mpa, no need to prepare specific place for the shear ;

12. Could configure moveable working shelf, can move and operate conveniently.

Technique Parameter

Model :SM-620-500

Machine Dimension L/W/H : 850mm×300mm×420mm

Blade size  : Upper straight blade 520×60×6mm

           Down straight blade520×38×6mm

Blade material :Imported high quality high speed steel

Board width :4-100mm is the best (small piece width, incomplete panel width)

V-cut speed :1mm-300mm/s

V-cut type :Glass fiber board, FR-4 base plate, aluminum base plate and other

single direction V-CUT products

V-CUT thickness :One third of the board thickness

Working Pressure :0.5-0.8mpa

Working Voltage :220V/110V optional

Power :10W

Machine Weight :138kg

Contact: Jacky.li@samtronik.com