SM-620 Guillotine type PCB Separator

SM-620 Guillotine type PCB Separator Description:

Contact: jacky.li@samtronik.com

Categories	Guillotine type PCB Separator
Album	View larger image
Brand	SAMTRONIK
Model	SM-620
Shear Length	0-330mm
Shear Width	0-unlimited
Shear Thickness	0.2-3.0mm
Shear Speed	one segmentation per second
Blade Size	356×45×6mm
Height of component	≦15mm,when component is on upper side ≦19mm, when component is on back
	More
Download DOC
Update Time	2020-11-16

Contact Now

Favorites

DETAIL INFORMATION

SM-620 PCB Depaneling Machine

Application

Separate precise SMD thin board, aluminum PCB, for special board , please check with Service.

Introduction

Apply latest pneumatic design of light weight, the

PCB could be separated in one time, with minimum

internal stress, especially suitable to separation of

precise SMD or thin board. Unlike double round

blade PCB separator, there won`t be any

bow wave or micro crack generated.

It uses wedge cutter to shear PCB in line, internal

stress decreases to lowest point, even the sensitive

SMD modules or capacitance still won`t be

influenced, then potential risk on quality is

minimized.

Cutter blade applies SKH-11 high speed steel

imported, also suitable to separate PCB without

V-slot

Features

1. Double straight blade, highly suitable to separate SMD thin board and aluminum PCB ;

2. Guillotine type, for PCB of thickness 0.2 to 3.0mm, cutting moving distance 1 to 3mm, safe operation;

3. keep internal stress within 80-180Ue, to avoid micro crack and damage to precise components;

4. able to shear edge of V-slot, distance from the component should ≧0.3mm ;

5. shear rate is one segmentation per second, control by foot-plate pneumatic switch ;

6. with calculation function, obvious vision on productivity ;

7. shear blade group is started passively, shear line and position can be handled safely ;

8. shear not by rolling blade, no dust, no motor drive, no pollution of carbon dust ;

9. shear is not by blade friction, so there is no residue from blade ;

10. Shear Blade warranty 6000000 times, no need electricity supply, then no consumption on electric equipment;

11. Air pressure 0.4-0.6Mpa, no need to prepare specific place for the shear ;

12. Could configure moveable working shelf, can move and operate conveniently.

Technique Parameter