10KV 2W Laser high voltage power supply

10KV 2W Laser high voltage power supply Description:

Product Name MFA
Power（W） 0.5W,1W,2W
Output Voltage(KV) ,3,4,5,6,7.5,8,9,10,

DIMENSIONS：
1KV-10KV：2.50L(63.50L)X1.25W(31.75W)X0.68H(17.34H)
APPLICATIONS
High voltage testing
PMT,MCP,radiation counter
Electron Beam/Ion Beam
Mass spectrometry
Electrostatic chuck(ESC)
PhotoMaltiplier Tubes
Scintillators
Electron Guns
Ion Guns
Nuclear Instruments
Electrostatic lenses
Spectroscopy
Microchannel Plates

SUMMARY
The MFA Series is a line of miniature, regulated high voltage power supplies.Each model is programmed from 0 to 100% of rated output via a 0 to +5volt DAC compatible high impedance programming input voltage. Temperaturedrift is typically less than 50 PPM/ C. These modules exhibit very low ripple, noise, and EMI/RFI by utilizing a quasi-sinewave oscillator,shielded transformer, excellent filtering techniques and an isolated steel enclosure featuring a separate grounding pin. An externally accessible potentiometer provides justable gain trim allowing for individual calibration of units. Wisman's HV technology results in a small compact and light weight modules that is available in either a positive or negative polarity output.
INPUT VOLTAGE:12Vdc±1VDC,200mA TYP. OPTION:5Vdc±1VDC,15Vdc±1VDC,24Vdc±1VDC
OUTPUT VOLTAGE:1KV,2KV,3KV,4KV,5KV,6KV,7KV,8KV,9KV,10KV,
INPUT CURRENT
<100 mA, No Load
<200 mA, Full Load
INPUT CAPACITANCE:440 uF low ESR
PROGRAMMING VOLTAGE:0 to +5VDC, <100uA
RESPONSE TIME:<250msec (Full Load, full scale response)
SETPOINT ACCURACY:+/-1%
LINEARITY:<0.01%(15%to 100%Vout)
STABILITY:<0.01%/ HOUR
TEMPCO:<25 ppm/ C       RIPPLE:10PPM
THERMAL SHOCK LIMIT:1℃ /10 seconds
OPERATING TEMPERATURE:-10 to +60 C
STORAGE TEMPERATURE:-20 to +90 C