8-Zone Reflow Soldering Ovens
Company Information:
Name: |
8-Zone Reflow Soldering Ovens |
Category: |
|
Offered by: |
|
8-Zone Reflow Soldering Ovens Description:
8-Zone Reflow Soldering Ovens TN380C
Protection system: TN380C uses SSR solid relay (450V) that has large power and pressure prevention to non-contact output, safe and reliable. It can monitor the change of temperature and heat number in furnace chamber with the functions fuzzy control and data collection. Then control the heating component with the least pulse and response quickly. TO keeps the Temperature control accuracy, but the equipment can not be damage for the high current and high voltage. And each room fits a safety pipe which is high temperature and high pressure resistant function so that the whole system can run safely and calmly.
Selling points
1. Chanel reflow oven with the thickness of 150mm
2. Use 24 chanel modular design reflow oven hardware temperature control system .
3. The only industry can achieve custom fuinction reflow oven software system .
4. The only industry have remote control reflow oven software system
5. Equipped with top brand HP OR Lenovo computer,such as optional industy computer according to customer requirment .
Product instruction
- Heating system: TN380C adopts high effective and energy-saving nickel-chromium heating tube. Advanced technology and Long life. And TORCH self-developed hot-air circling system features warm up quickly, which can make PCB component be heated evenly.
- Protection system: TN380C uses SSR solid relay (450V) that has large power and pressure prevention to non-contact output, safe and reliable. It can monitor the change of temperature and heat number in furnace chamber with the functions fuzzy control and data collection. Then control the heating component with the least pulse and response quickly. TO keeps the Temperature control accuracy, but the equipment can not be damage for the high current and high voltage. And each room fits a safety pipe which is high temperature and high pressure resistant function so that the whole system can run safely and calmly.
- Accuracy control by IPC and PID intelligent arithmetic. According to the PID intelligent calculation, heat output can be controlled accurately and response to the change of outside to balance the temperature. The whole system has a modularized design. It is convenient to maintenance and disassembles
- Outer shell and furnace body of TN380C can be opened wholly and automatically. It is convenient to clean and maintain it.
Main features
1> Intuitional welding control: TN380C adopts advanced furnace temperature collection system. It can test temperature curve and temperature in furnace hearth. The temperature curve can be recorded or printed at the same time.
2> Smooth and safe transmission system: Drive system adopts a high quality conversion motor and conversion system .It also has a closed-loop governor and Turbine speed reducing box of 1:100 to keep running smoothly .Speed:01600mm/min.
3> Stable and safe electric control system: Delay switch protection. After power off, temperature drops evenly so that can prevent damage to transmission component and heater.
4> Upper and lower heating zones are separately controlled. The circulation speed can also adjust separately. It is suitable for welding different PCB plates and components.
Technical Parameters
Model:TN380C
Heating part parameter
Heating zone:8 heating zones(8 upper, 8cover)+1 cooling zone
Heating method:Full forced Hot air heating
Warm-up time:25min
Cooling zone:1 zone, (1up/1 below)
Cooling method:transverse flow vortex centrifuge blower
Built-in automatic relay heating system:To prevent over-pressure damage controller or motor when start up and to prevent component damage when welding.
Transmission parameter
PCB Board width:≤ 300mm
PCB conveyor Height:900±20mm
conveyor direction:L→R or R--L
Conveyor Material:Stainless steel
Chain-driven Mesh belt conveyor:Net belt and chain-driven transmission
Mesh belt width:300mm
Conveyor speed:0-1600mm/min adjustable
Control part parameter
Power supply:380V (3 ph, 4 wires) 50/60Hz
Max Power:42KW
Normal working power:23KW
Warm-up time:≤ 30min
Control system:PLC+ Torch module temp control system+ IPC
Range of temperature control:Room Temperature-360 °C
Temperature control:Advanced Intelligent micro computer PID temperature control automatically in each zone + SSR non-contact output
Precision of temperature control:± 2°C
Temperature distributing error:± 2°C
Machine Body Parameter
Net Weight:860kg
Dimension( L×W×H )(mm):3500×900×1390mm
Beijing Torch Co.,Ltd.
Skype:torchsmt08
Tel:8610-60509015ext862
Mobile:8613241060184
E-mail:s8@tonzh.com.cn
Trade massenger:cn1510945738
Web:www.torchsmt.com
8-Zone Reflow Soldering Ovens was added in Mar 2016
8-Zone Reflow Soldering Ovens has been viewed 643 times
20 More Products from Beijing Torch Co.,Ltd :