Water-based Stencil Cleaner

Water-based Stencil Cleaner Description:

Features：
●Dedicated to water-based liquid cleaning stencil and PCBA process of high-pressure spray systems.
●Double liquid groove, achieve the cleaning and rinsing demand.
●Process: Cleaning-Chemical isolation- Rinsing(Open / close loop) - Drying
● Preparation of fully automatic touch screen operating software, save program file and easy to use.
●Cleaning count feature that automatically aggregate cleaning number of stencil and filtration cycle times.
●Liquid and pump pressure gauge can be displayed by panel
●Cleaning pressure can be adjusted independently, A wide process window
●Resistivity meter monitoring rinse to ensure cleanliness
●It supplies filter life monitoring alarm
●Stainless steel canbinet with good reliability and can resisit any hurt by acid and alkali cleaning chemistry.
●Rinsing liquid emission filtering that more environmental friendly;

Technical Data:
Stencil Size：Max 800mm(L) ×750mm(W) × 40mm(H)
Liquid Tank Capability：Max 50L*2PCS
Cleaning、Rinsing Method：Move up and down spray liquid through high pressure spray liquid
Drying Method：High pressure hot air
Clean Time Setting：2-5 Minutes
Clean Dry Time:1-2 Minutes
Rinse Time Setting：1 Minutes
Rinse Times: 1-99(set)
Drying Time：3-5 Minutes
Clean Cycle Filtering ： 1 filter：10μm
                               2 filter:   1μm
ing Discharge Filter：1μm(Filter tiny impurities)
Liquid Heating Temperature：Room temperature～70℃
Resistivity Meter Range: 1MΩ－15MΩ
Compressor Air：0.45Mpa ～ 0.7Mpa
Power Supply：AC380V 50HZ 60A
Outlet Size：Φ124(W)×30mm(H)
Net Weight：600Kg
Machine Size：1560mm(L) ×1160mm(W) × 1850mm(H)