PCB Magazine Unloader For SMT | SZTech-SMT

PCB Magazine Unloader For SMT | SZTech-SMT Description:

PCB Magazine Unloader For SMT

• AC lift motor.
• Cylinder or motor to push board.
• Customized height.
• Panasonic PLC smart control.
• HMI touchscreen control.
• Airtek air control.
• “Omron” sensor.
• SMEMA on each side.

Optional:

• Multiple magazine sizes for option.
• Motor type/ cylinder type.
• Cover for safety.
• CE Certificates.
• 900 mm height or 950 mm height.
• Servo control.

Main specifications

How to operate the PCB magazine unloader when changing products?

Press the Manual running, and choose the pitch between two PCB. Adjust the width of the Magazine to the new PCB width, making sure the PCB can insert into Magazine smoothly. Load a Magazine into the unloader. Press Box input to let the Magazine flow to the lift platform, click clamping, then click lift down. The magazine will lift down to the position where the first board will be unloaded from the rail. Use the rocker to adjust the pusher to be on the center line of the PCB. Can easily push from rail to magazine by hand. Normally the magazine layer is lower than the rail around 1mm. Click the Push plate to check whether the machine can be able to store PCB from the rail into the magazine. Click Exit and then click Automatic running, the machine is getting ready and waiting for sending a board signal.

Welcome to contact the sztech-smt team if you need any technical support!