Nitrogen Reflow Oven | SZTech-SMT
Company Information:
Name: |
Nitrogen Reflow Oven | SZTech-SMT |
Category: |
|
Offered by: |
|
Nitrogen Reflow Oven | SZTech-SMT Description:
Nitrogen Reflow Oven from SZTech SMT provides a stable temperature environment to ensure the best solder quality performance of your SMT line.
Main Specifications of Nitrogen Reflow Oven
Model | 10 zones nitrogen reflow oven | |
Heating System | Number of heating zones | UP 10/BOTTOM 10 |
Number of cooling zones | 2 | |
Length of heating zones | 3900mm | |
Heating mode | Hot air | |
Cooling Mode | N2 Oven: Cooling Water | |
Exhaust Volume | 10m³/min * 2 exhausts | |
Conveyor System | Max. Width of PCB | 250*2mm |
Mesh belt width | 700mm | |
Transmission Direction | L→R(or R→L) | |
Transmission Net Height | 900±20mm | |
Transmission type | Mesh and chain | |
Conveyor speed | 0-2000mm/min | |
Auto/manual Lubrication | standard | |
Fixed rail side | 1.4 Rails Fixed, 2.3 Rails are movable. | |
Components high | Top and bottom 25mm | |
Control system | Power supply | 5 line 3 phase 380V 50/60Hz |
Total power | 36kw | |
Normal power consumption | 8-12KW | |
Warming time | About 20 mins | |
Temp. setting range | Room temperature-300℃ | |
Temp. control method | PID close loop control & SSR driving | |
Temp. control precision | ±1℃ | |
Temp. deviation on PCB | ±2℃ | |
Data storage | Process Data and status storage(80GB) | |
Nozzle plate | Aluminum Alloy Plate | |
Abnormal Alarm | Abnormal temp. (extra-high/extra-low temp.) | |
Board dropped alarm | Tower light: Yellow-warming, Green-normal, Red-abnormal | |
General | Dimension(L*W*H) | 6200×1550×1550mm |
Weight | 2150KG | |
Color | Computer gray |
Nitrogen system:
1. High-precision and reliable oxygen analyzer + cooling water
2. With a nitrogen flow meter and nitrogen pipeline
3. Furnace body sealing optimization design reduces nitrogen loss. An external chiller provides a high-quality cold source.
4. Prevent oxidation
5. Improve wetting force and wetting speed
6. Reduce solder, avoid bridging, and get good soldering quality.
7. Nitrogen flow controller: normal nitrogen consumption: 20m3/hr.500-1000ppm (oxygen concentration)
8. Fully automatic oxygen analyzer: fast response time; complete self-diagnosis and testing of important functions and parameters
9. Cooling water machine: 3HP; external; sufficient heat dissipation capacity to meet the requirements of a lead-free process
10. Flux management: The nitrogen furnace is equipped with an air circulation filter as standard to optimize the environment in the furnace and facilitate maintenance
Nitrogen Reflow Oven | SZTech-SMT was added in Apr 2023
Nitrogen Reflow Oven | SZTech-SMT has been viewed 106 times
20 More Products from SZTech-SMT Firm :