SMT RHHT-1000 Automatic Water-based Stencil Cleaning Machine
Company Information:
Name: |
SMT RHHT-1000 Automatic Water-based Stencil Cleaning Machine |
Category: |
|
Offered by: |
|
SMT RHHT-1000 Automatic Water-based Stencil Cleaning Machine Description:
Content |
Parameter |
Wash area size |
750mm(L) ×750mm(W) × 40mm(H) |
Appearance dimensions of the device |
1700mm(L) ×1200mm(W) × 2100mm(H) |
Power / Air Source |
Three-phase five-wire system, 380V/18Kw (rated power ) /0 .45Mpa-0.7Mp a |
Tank capacity |
70L |
Spray tank dilution tank heater power |
9KW |
Cleaning time |
0~99 minutes ( adjustable ) |
Cleaning temperature (liquid) |
Normal temperature ~70 ℃ (adjustable) |
Rinse time |
1 minute / time ( 1-59 times / adjustable) |
Rinse temperature ( DI water) |
Normal temperature ~70 ℃ (adjustable) |
Drying time |
0~ 99min / ( adjustable ) |
Cleaning size range setting |
50—750mm |
Cleaning area: The cleaning liquid storage tank is used to recover and store the cleaning liquid, and perform 4 -stage filtration, heating and monitoring, and liquid level monitoring for the cleaning liquid
Cleaning water pump: 2.2KW ( 1 ), 4 spray arms , 40 nozzles
Storage tank volume: ≤ 90L ( 1 )
Filter device: stainless steel filter 1mm ( 1 piece), filter screen baffle plate 100 mesh ( 1 piece), tank filter bag: 10UM (1 piece ), cleaning folded filter element 0.45UM (3 pieces)
Heating power: 9KW ( 1 bar), heating temperature: room temperature-- 70 ℃ (adjustable)
Liquid level protection: low position, middle position, stop position, over limit position
Spray pressure: 0.1-0.6Mpa (adjustable)
Rinsing area: The rinsing water storage tank is used to recover the storage water, and perform 4 -stage filtration, heating and monitoring, and liquid level monitoring for the rinsing water
Rinse water pump: 2.2KW ( 1 ), 4 spray arms , 40 nozzles
Rinse storage tank volume: ≤ 90L ( 1 )
Heating power of rinsing water tank: 9KW ( 1 bar); Heating temperature: room temperature-- 70 ℃ (adjustable)
Filter device: stainless steel filter 1mm ( 1 piece), filter screen baffle plate 100 mesh ( 1 piece) tank filter bag: 10UM (1 piece ), cleaning folded filter element 0.45UM (3 pieces)
Liquid level protection: low position, middle position, stop position, over limit position
Spray pressure: 0.1-0.6Mpa (adjustable)
Drying area: The drying section is used to thoroughly dry the product and perform heating and wind cutting + heating and temperature monitoring of the wind.
Air knife fan: 3.45KW ( 1 piece )
Stainless steel heating pipe: 6KW ( 1 piece), 4 wind cutting air knives
Heating temperature: room temperature --60 ℃ (adjustable)
Up and down running device on the screen: the running device is stably rotated by a stepping motor, a stepping driver and an encoder;
Stepper motor: 1 set
Stepper driver: 400W (1 ), 1 encoder
SMT RHHT-1000 Automatic Water-based Stencil Cleaning Machine was added in Mar 2024
SMT RHHT-1000 Automatic Water-based Stencil Cleaning Machine has been viewed 23 times
7 More Products from Dongguan RuiHengHuaTai Electronic Co., Ltd :